HVI102

H HiTRON UNIVERSAL INPUT AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI102 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES LOW-PROFILE U-BRACKET FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: V-M connector. Input Frequency: 47-63Hz. Inrush Current: ≤30.6A peak @230Vac. Input Current: Typ. 1.8A @115Vac, 0.8A @230Vac. Dielectric Withstand: www.DataSheet4U.com Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 11mS @115Vac, 60mS @ 230Vac. Power Fail Signal: Installed. Earth Leakage: Less than 0.4mA @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: V-M connector. Output Wattage: Typ. 100 watts. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2%. Aux.VO2/VO3/VO4 typ. ± 3-5% (Common choke). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output. UVP: Built-in at main output. Remote Sensing: Installed in main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Operating Temperature: 0 to +50 °C under forced air flow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient:...