AWL9232

802.11b/g/n WLAN PA/LNA/RF Switch 2.5% EVM @ POUT = +19 dBm with IEEE 802.11g 64 QAM OFDM at 54 Mbps -34 dBr 1st Sidelobe / -56 dBr 2nd Sidelobe ACPR at +21 dBm with IEEE 802.11b at 1, 2, 5.5, 11 Mbps, Gaussian baseband filtering SP3T RF Switch to Enable Bluetooth Path Single +3.8 V Supply Transmit Path Linear Power of Gain 24 dB Receive Path In-Band Gain of 13 dB Receive Path Noise Figure of 1.9 dB 3 x 3 x 0.55 mm ULPCC Package Leadfree and RoHS Compliant AWL9232 Preliminary Data Sheet - Rev 1.0 2400 – 2500 MHz FEATURES AW L9 232 APPLICATIONS 802.11b/g WLAN in Consumer Electronics Products (e.g., cell phones, MP3 players, cameras, etc.) 2.4 GHz Cordless Phone Handsets/Basestations The ANADIGICS AWL9232 is a high performance InGaP HBT power amplifier, low-noise amplifier and RF switch integrated on a single IC. It is particularly applicable in consumer electronics products (e.g., cell phones, MP3 players, cameras, etc.) that integrate 802.11b/g WLAN in the 2.4 - 2.5 GHz band. Matched to 50  on all RF ports, the part requires only one www.DataSheet4U.com choke inductor and one power supply decoupling cap off-chip. The antenna port is switched between WLAN transmit, WLAN receive and Bluetooth paths with a low-loss single-pole triple-throw RF switch. The transmit path PA exhibits unparalleled linearity for both IEEE 802.11g and 802.11b WLAN systems under the toughest signal configurations within these standards. The WLAN recei...