RMS Power Detector
19-4982; Rev 0; 10/09
KIT ATION EVALU E L B A AVAIL
RMS Power Detector
General Description
The MAX2203 RMS power detec...
Description
19-4982; Rev 0; 10/09
KIT ATION EVALU E L B A AVAIL
RMS Power Detector
General Description
The MAX2203 RMS power detector is designed to operate from 800MHz to 2.0GHz. The device is ideal for wideband code-division multiple access (WCDMA), cdma2000®, and high-speed downlink/uplink packet access. The MAX2203 accepts an RF signal at the input and outputs the same voltage regardless of the peak-average of the input signal. The output voltage and input power is linear in dB. The device has a -24dBm to +3dBm detection range, and every dB change in input power gives 35mV (typ) change in output voltage. The MAX2203 operates from a 2.5V to 4.2V supply and is specified over the -40°C to +85°C extended temperature range. The device is available in a 6-bump WLP package. o 35mV/dB (typ) Log Detector o 0.1dB (typ) RMS Accuracy from WCDMA Modulation Change o ±0.4dB Detection Error Due to Temperature o +2.5V to +4.2V Single-Supply Operation o Space-Saving 6-Bump WLP Package
Features
o -24dBm to +3dBm Power-Detection Range
MAX2203
Ordering Information
PART MAX2203EWT+T10 TEMP RANGE -40°C to +85°C PINPACKAGE 6 WLP TOP MARK AA
Applications
WCDMA, cdma2000, 1xEVDO High-Speed Downlink Packet Access (HSDPA) High-Speed Uplink Packet Access (HSUPA)
+Denotes a lead(Pb)-free/RoHS-compliant package. T = Tape and reel.
Pin Configuration
TOP VIEW (BUMPS ON BOTTOM)
1 + 2
Typical Operating Circuit appears at end of data sheet.
A
MAX2203
RFIN/ENA GND
www.DataSheet4U.com
B GND C VCC OUT FILT
cd...
Similar Datasheet