DatasheetsPDF.com

CGR-0118Z Dataheets PDF



Part Number CGR-0118Z
Manufacturers RF Micro Devices
Logo RF Micro Devices
Description DUAL CATV 5MHz to 65MHz CATV AMP IC
Datasheet CGR-0118Z DatasheetCGR-0118Z Datasheet (PDF)

CGR-0118Z Dual CATV 5MHz to 65MHz CATV Amp IC CGR-0118Z DUAL CATV 5MHz to 65MHz CATV AMP IC Package: SOIC 8 www.DataSheet4U.com Product Description RFMD’s CGR-0118Z is a high performance 75 Ω push-pull InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias netwrok provides stable current over temperature and process variations. Designed to run over a wide range of supply voltage, from 5V to 12V, the CGR-0118Z does not require a bias resistor .

  CGR-0118Z   CGR-0118Z



Document
CGR-0118Z Dual CATV 5MHz to 65MHz CATV Amp IC CGR-0118Z DUAL CATV 5MHz to 65MHz CATV AMP IC Package: SOIC 8 www.DataSheet4U.com Product Description RFMD’s CGR-0118Z is a high performance 75 Ω push-pull InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias netwrok provides stable current over temperature and process variations. Designed to run over a wide range of supply voltage, from 5V to 12V, the CGR-0118Z does not require a bias resistor as compared to typical Darlington amplifiers. The CGR-0118Z is designed for 75 Ω return path applications where linear performance is needed over the frequency range 5MHz to 65MHz. Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT InP HBT RF MEMS LDMOS 4 5 3 6 2 7 Features „ „ „ „ „ „ Amplifier Configuration 1 8 „ Flat Gain Response: 25.4 ± 0.3dB Excellent OIP3: 37.5dBm Superior Return Loss: >20dB Extremely Low CSO/CTB: -80/-67dBc Low Noise Figure: 3.0dB Single Supply: 5V to 12V Low DC Current: 130mA CATV Return Path Amplifier CATV Line Amplifier Optical RX/TX 9 Applications „ „ „ Parameter Electrical Characteristics Gain Gain Slope Input Return Loss Output Return Loss Noise Figure Composite Triple Beat Cross Modulation Composite Second Order 1dB Gain Compression Point Output 3rd Order Intercept Point Supply Voltage Operating Current Min. Specification Typ. 25.4 ±0.3 20 20 3 -60 -63 -80 73.5 37.5 12 130 Max. Unit dB dB dB dB dBc dBc dBc dBc dBmV dBm V mA Condition VCC =12V, TA =25°C, 75 Ω System 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel 65MHz 5MHz, 65MHz (5dBm/tone at output, 1MHz spacing) RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 14 CGR-0118Z Absolute Maximum Ratings Parameter DC Supply (VCC) RF Input Voltage (Single Tone) (VIN) Operating Case Temperature Range (TC) Storage Temperature Range (TSTG) RF Input (RFIN) www.DataSheet4U.com Rating 14 65 -40 to +100 -40 to +150 +24 Unit VDC dBmV °C °C dBmV Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating condit.


ACT6391 CGR-0118Z CGR-0218Z


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)