LTC3723-2

U U FEATURES ■ High Efficiency Synchronous Push-Pull PWM ■ 1.5A Sink, 1A Source Output Drivers ■ Supports Push-Pull, Full-Bridge, Half-Bridge, and Forward Topologies ■ Adjustable Push-Pull Dead-Time and Synchronous Timing ■ Adjustable System Undervoltage Lockout and Hysteresis ■ Adjustable Leading Edge Blanking ■ Low Start-Up and Quiescent Currents ■ Current Mode (LTC3723-1) or Voltage Mode (LTC3723-2) Operation ■ Single Resistor Slope Compensation ■ VCC UVLO and 25mA Shunt Regulator ■ Programmable Fixed Frequency Operation to 1MHz ■ 50mA Synchronous Output Drivers ■ Soft-Start, Cycle-by-Cycle Current Limiting and Hiccup Mode Short-Circuit Protection ■ 5V, 15mA Low Dropout Regulator ■ Available in 16-Pin SSOP Package U APPLICATIO S ■ Telecommunications, Infrastructure Power Systems ■ Distributed Power Architectures LTC3723-1/LTC3723-2 Synchronous Push-Pull PWM Controllers DESCRIPTIO The LTC®3723-1/LTC3723-2 synchronous push-pull PWM controllers provide all of the control and protection functions necessary for compact and highly efficient, isolated power converters. High integration minimizes external component count, while preserving design flexibility. The robust push-pull output stages switch at half the oscillator frequency. Dead-time is independently programmed with an external resistor. Synchronous rectifier timing is adjustable to optimize efficiency. A UVLO program input provides precise system turn-on and turn off voltages. The LTC3723-1 features peak current mode c...