SAW bandpass filter Bandpass filters
www.DataSheet4U.com
SAW Components
SAW bandpass filter
Bandpass filters for terrestrial TV applications
Series/type: O...
Description
www.DataSheet4U.com
SAW Components
SAW bandpass filter
Bandpass filters for terrestrial TV applications
Series/type: Ordering code: Date: Version:
X 6764 D B39440-X6764-N201 June 14, 2006 2.0
© EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
www.DataSheet4U.com
SAW Components SAW bandpass filter Data sheet
Application
s s s s s
X 6764 D 44.00 MHz
IF filter for ATSC Usable bandwidth 5.5MHz Constant group delay Suitable for single use and cascade of two devices Balance input option
Features
s s s s s
Duroplast package SIP5D Standard IC package Approximate weight 0.5 g RoHS compatible Tinned CuFe alloy terminals
1
2
3 13,7
4
5 2,4
0,65 4x 2,54 0,38
Pin configuration
s s s s s
1 2 3 4 5
Input Input - ground Chip carrier - ground Output Output
Please read cautions and warnings and important notes at the end of this document.
2
June 14, 2006
3,4
4,8
www.DataSheet4U.com
SAW Components SAW bandpass filter Data sheet
Characteristics Reference temperature: Terminating source impedance: Terminating load impedance: TA = 25 (45) ˚C ZS = 50 Ω ZL = 2 kΩ || 3 pF min. Insertion attenuation α Reference level for 44.06 (44.00) MHz the following data Amplitude ripple (p-p) ∆α 41.66 ... 46.46 (41.60 ... 46.40) MHz Relative attenuation αrel 39.81 (39.75) MHz 41.06 (41.00) MHz 41.37 (41.31) MHz 46.75 (46.69) MHz 47.06 (47.00) MHz 47.31 ...
Similar Datasheet