45DB041

AT45DB041 Features Single 2.7V - 3.6V Supply Serial Interface Architecture Page Program Operation Single Cycle Reprogram (Erase and Program) 2048 Pages (264 Bytes/Page) Main Memory Two 264-Byte Data Buffers - Allows Receiving of Data while Reprogramming of Non-Volatile Memory Internal Program and Control Timer Fast Page Program Time - 7 ms Typical 120 ms Typical Page to Buffer Transfer Time Low Power Dissipation 4 mA Active Read Current Typical 8 mA CMOS Standby Current Typical 5 MHz Max Clock Frequency Hardware Data Protection Feature Serial Peripheral Interface (SPI) Compatible – Modes 0 and 3 CMOS and TTL Compatible Inputs and Outputs Commercial and Industrial Temperature Ranges Description The AT45DB041 is a 2.7-volt only, serial interface Flash memory suitable for in-system reprogramming. Its 4,325,376 bits of memory are organized as 2048 pages of 264-bytes each. In addition to the main memory, the AT45DB041 also contains two data buffers of 264-bytes each. The buffers allow receiving of data while a page in the main memory is being reprogrammed. Unlike conventional Flash memories that are accessed randomly with multiple address lines and a parallel interface, the DataFlash uses a serial interface to sequentially access its data. The simple serial interface facilitates hardware layout, increases system reliability, minimizes switching noise, and Pin Configurations (continued) PLCC Pin Name Function 4 CS 3 NC 2 NC 1 GND 32 VCC 31 NC 30 NC...