MAX11646

19-5134; Rev 0; 1/10 KIT ATION EVALU E L B AVAILA www.DataSheet4U.com 2.7V to 3.6V and 4.5V to 5.5V, Low-Power, 1-/2-Channel, 2-Wire Serial, 10-Bit ADCs General Description The MAX11646/MAX11647 low-power, 10-bit, 1-/2channel analog-to-digital converters (ADCs) feature internal track/hold (T/H), voltage reference, a clock, and an I 2 C-compatible 2-wire serial interface. These devices operate from a single supply of 2.7V to 3.6V (MAX11647) or 4.5V to 5.5V (MAX11646) and require only 670µA at the maximum sampling rate of 94.4ksps. Supply current falls below 230µA for sampling rates under 40ksps. AutoShutdown™ powers down the devices between conversions, reducing supply current to less than 1µA at low throughput rates. The MAX11646/MAX11647 each measure two single-ended or one differential input. The fully differential analog inputs are software configurable for unipolar or bipolar and single-ended or differential operation. The full-scale analog input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX11647 features a 2.048V internal reference and the MAX11646 features a 4.096V internal reference. The MAX11646/MAX11647 are available in an 8-pin µMAX® package and are guaranteed over the extended temperature range (-40°C to +85°C). For pin-compatible 12-bit parts, refer to the MAX11644/MAX11645 data sheet. Features ♦ High-Speed I2C-Compatible Serial Interface ♦ ♦ ♦ ♦ ♦ ♦ ♦ 400kHz Fast Mode 1.7MHz High-Sp...