Document
TC7SP300WBG
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC7SP300WBG
Dual supply 2-Input NAND Gate with Level Translator
The TC7SP300 is a dual supply, advanced high-speed CMOS 2-input dual supply voltage interface NAND gate fabricated with silicon gate CMOS technology.
It is also designed with over voltage tolerant inputs and outputs up to 3.6 V.
Designed for use as an interface between a 1.2-V, 1.5-V, 1.8-V, or 2.5-V bus and a 1.8-V, 2.5-V or 3.3-V bus in mixed 1.2-V, 1.5-V, 1.8-V or 2.5-V/1.8-V, 2.5-V or 3.3-V supply systems.
All inputs are equipped with protection circuits against static discharge.
S-WFBGA6-0102-0.40A01 Weight: 1 mg (typ.)
Features
• Level converter for interfacing 1.2-V to 1.8-V, 1.2-V to 2.5-V, 1.2-V to 3.3-V, 1.5-V to 2.5-V, 1.5-V to 3.3-V, 1.8-V to 2.5-V, 1.8-V to 3.3-V or 2.5 V to 3.3-V system.
• High-speed operation :
tpd = 6.8 ns (max) (VCCA = 2.5 ± 0.2 V, VCCB = 3.3 ± 0.3 V) tpd = 7.8 ns (max) (VCCA = 1.8 ± 0.15 V, VCCB = 3.3 ± 0.3 V) tpd = 9.0 ns (max) (VCCA = 1.5 ± 0.1 V, VCCB = 3.3 ± 0.3 V) tpd = 31 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 3.3 ± 0.3 V) tpd = 9.5 ns (max) (VCCA = 1.8 ± 0.15 V, VCCB = 2.5 ± 0.2 V) tpd = 10.5 ns (max) (VCCA = 1.5 ± 0.1 V, VCCB = 2.5 ± 0.2 V) tpd = 32 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 2.5 ± 0.2 V) tpd = 37 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 1.8 ± 0.15 V)
• Output current :
IOH/IOL = ±12 mA (min) (VCCB = 3.0 V) IOH/IOL = ±9mA (min) (VCCB = 2.3 V) IOH/IOL = ±3 mA (min) (VCCB = 1.65 V)
• Latch-up performance: -300 mA
• ESD performance:
Machine model ≥ ±200 V Human body model ≥ ±2000 V
• Ultra-small package:
WCSP6
• Power-down protection is provided on all inputs and outputs
Start of commercial production
2009-04
1
2014-03-01
Pin Assignment (top view)
VCCA GND A
12
GA
● B
VCCB B
CY
Truth Table
Inputs
A
B
L
L
L
H
H
L
H
H
Block Diagram
-
Output
Y H H H L
VCCA
VCCB
A
Logic
level
B
converter
TC7SP300WBG
Y
2
2014-03-01
TC7SP300WBG
Absolute Maximum Ratings (Note 1)
Characteristics
Symbol
Rating
Unit
Power supply voltage
(Note 2)
DC input voltage (A, B)
DC output voltage (Y)
Input diode current Output diode current DC output current
DC VCC / ground current per supply pin
Power dissipation Storage temperature
VCCA VCCB
VIN
VOUTB
IIK IOK IOUTB ICCA ICCB PD Tstg
−0.5 to 4.6 V
−0.5 to 4.6
−0.5 to 4.6
V
−0.5 to 4.6 (Note 3) V
−0.5 to VCCB + 0.5 (Note 4)
−25
mA
±50 (Note 5) mA
±25
mA
±25 mA
±50
100
mW
−65 to 150
°C
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 2: Don’t supply a voltage to VCCB pin when VCCA is in the OFF state.
Note 3: Output in OFF state
Note 4: High or Low state. IOUT absolute maximum rating must be observed.
Note 5: VOUT < GND, VOUT > VCC
Operating Ranges (Note 6)
Characteristics
Symbol
Rating
Unit
Power supply voltage
Input voltage (A, B)
Output voltage (Y)
Output current (Y)
Operating temperature Input rise and fall time
VCCA VCCB VIN
VOUTB
IOUTB
Topr dt/dv
1.1 to 2.7 V
1.65 to 3.6
0 to 3.6
V
0 to 3.6 (Note 7)
0 to VCCB (Note 8) ±12 (Note 9) ±9 (Note 10) ±3 (Note 11)
−40 to 85 0 to 10 (Note 12)
V
mA °C ns/V
Note 6: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND.
Note 7: Output in OFF state Note 8: High or Low state Note 9: VCCB = 3.0 to 3.6 V Note 10: VCCB = 2.3 to 2.7 V Note 11: VCCB = 1.65 to 1.95 V Note 12: VIN = 0.8 to 2.0 V, VCCA = 2.5 V, VCCB = 3.0 V
3
2014-03-01
TC7SP300WBG
Electrical Characteristics
DC Characteristics (Ta = −40 to 85°C)
Characteristics
Symbol
Test Condition
VCCA (V) VCCB (V)
Ta = −40 to 85°C Unit
Min
Max
1.2
1.65 to 3.6
⎯
1.10
H-level
VP
⎯
1.4
1.65 to 3.6
⎯
1.65
1.65 to 3.6
⎯
1.20
1.35
V
2.3
1.65 to 3.6
⎯
1.70
Input voltage
2.7
1.65 to 3.6
⎯
2.00
1.2
1.65 to 3.6
0.10
⎯
1.4
1.65 to 3.6
0.20
⎯
L-level
VN
⎯
1.65
1.65 to 3.6
0.30
2.3
1.65 to 3.6
0.50
⎯
V
⎯
2.7
1.65 to 3.6
0.70
⎯
1.2
1.65 to 3.6
0.20
0.90
1.4
1.65 to 3.6
0.20
0.90
Hysteresis voltage
VH
⎯
1.65
1.65 to 3.6
0.20
0.95
V
2.3
1.65 to 3.6
0.30
1.00
2.7
1.65 to 3.6
0.30
1.20
IOHB = −100 μA 1.1.