TPD4124AK
TOSHIBA Intelligent Power Device High Voltage Monolithic Silicon Power IC
www.DataSheet4U.com
TPD4124AK
The T...
TPD4124AK
TOSHIBA Intelligent Power Device High Voltage Monolithic Silicon Power IC
www.DataSheet4U.com
TPD4124AK
The TPD4124AK is a DC brush less motor driver using high voltage PWM control. It is fabricated by high voltage SOI process. It is three-shunt resistor circuit for current sensing. It contains level shift high-side driver, low-side driver, IGBT outputs, FRDs and protective functions for under voltage protection circuits and thermal shutdown circuit. It is easy to control a DC brush less motor by just putting logic inputs from a MPU or motor controller to the TPD4124AK.
HDIP26-P-1332-2.00
Weight: 3.8 g (typ.)
Features
High voltage power side and low voltage signal side terminal are separated. It is the best for current sensing in three shunt resistance. Bootstrap circuit gives simple high-side supply. Bootstrap diodes are built in. A dead time can be set as a minimum of 1.4 μs, and it is suitable for a Sine-wave from drive. 3-phase bridge output using IGBTs. FRDs are built in. Included under voltage protection and thermal shutdown. The
regulator of 7 V (typ.) is built in. Package: 26-pin DIP.
This product has a MOS structure and is sensitive to electrostatic discharge. When handling this product, ensure that the environment is protected against electrostatic discharge.
1
2008-11-26
Marking
GND 1 NC 2 NC 3 HU 4 HV 5 HW 6 LU 7 LV 8 LW 9 SD 10 DIAG 11 NC 12 VREG 13 NC 14 VCC 15 GND 16
19 IS1 25 W 24 BSW 26 IS3 23 VBB
Pin Assignment
Part No....