Battery monitor
STC3100
Battery monitor IC with Coulomb counter/gas gauge
Features
■ Battery voltage monitoring ■ Internal temperature ...
Description
STC3100
Battery monitor IC with Coulomb counter/gas gauge
Features
■ Battery voltage monitoring ■ Internal temperature sensor ■ Coulomb counter with 12/14-bit AD converter,
+/- 80 mV input voltage range ■ Internal or external 32768 Hz time base ■ I2C interface for gas gauge monitoring and
device control ■ 32-RAM bytes ■ 8-byte unique device ID ■ One general-purpose I/O
Applications
■ Cellular phones, PDA, MP3 players, cordless phones
■ Digital cameras, USB appliances, Bluetooth devices
Description
The STC3100 monitors the critical parameters of a single-cell Li-Ion battery (voltage, temperature and current) and includes hardware functions to implement a gas gauge for battery charge monitoring, based on a programmable 12- to 14-bit A/D converter. With a typical 30 milliOhms external sense resistor, the battery current can be up to 2.5 A and the accumulator system provides a capacity up to +/-7000 mAh with a resolution of 0.2 mAh.
The device is programmable through the I2C interface.
MiniSO-8 (Plastic micropackage)
DFN8 3x3 (Plastic micropackage)
Pin connections (top view)
IO0 1 ROSC 2
SDA 3 SCL 4
8 VIN 7 VCC 6 CG
5 GND
January 2009
Rev 1
1/21
www.st.com
21
Block diagram
1
Block diagram
Figure 1. STC3100 internal block diagram
STC3100
VCC
SCL SDA
Accumulators and control registers
1.2 V reference
32 kHz time base
Oscillator
AD converter 11 bits (unsigned)
MUX
Temp sensor
AD converter 12 / 14 bits (signed)
CG+ CG-
ROSC
VIN CG
General-purpose I/O line
...
Similar Datasheet