LB11650

Ordering number : ENN7390 www.DataSheet4U.com Monolithic Digital IC LB11650 PWM Input Forward/Reverse Motor Driver Overview The LB11650 is a full bridge driver that supports switching between forward and reverse directions. It operates in one of four modes under application control: forward, reverse, brake, and open. It also supports direct PWM control from an external signal. The LB11650 is optimal for driving brush DC motors and bipolar stepping motors. Package Dimensions unit: mm 3113A-SIP14HZ [LB11650] 27.0 20.0 11.8 R1.7 14.5max 4.0 Supports PWM input Built-in high and low side diodes Simultaneous on state prevention function (prevents through currents) Built-in thermal shutdown circuit (latching type) High and low side short circuit protection function (latching type overcurrent protection) Externally controllable modes: forward, reverse, brake, open Standby mode function 7.8 8.4 Features 1 1.94 3.56 0.5 14 5.2 4.6 0.4 1.6 2.2 1.78 3.56 SANYO: SIP14HZ Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Motor supply voltage Peak output current Continuous output current Logic system supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VM max IO PEAK IO max VCC max Pd max Topr Tstg When mounted on a glass epoxy circuit board (reference value): 114.3 mm × 76.1 mm × 1.6 mm tW ≤ 10 µs Conditions Ratings 30 2.0 1.5 7.0 3.5 –20 to +85 –55 to +150 Unit V A A V W °C °C Any and all SANYO products des...