915 MHz SAW Filter
Preliminary Data Sheet
Features
• • • • • • • • For ISM band applications Usable bandwidth 26 MHz Low loss High attenuat...
Description
Preliminary Data Sheet
Features
For ISM band applications Usable bandwidth 26 MHz Low loss High attenuation No impedance matching required for operation at 50 Ω Single-ended operation Chip Scale Package (CSP) Small size
Part Number 856327 www.DataSheet4U.com 915 MHz SAW Filter
Package
Surface Mount 2.00 x 1.50 x 0.76 mm
Pin Configuration
Bottom View
1
2
0.76 NOM. 0.84 MAX. 2.00 1.80
4
3
1.50
1.30 0.42
Pin No. 1 3 2,4
Description Input Output Case ground
0.25x45° CHAMFER
0.56
Dimensions shown are nominal in millimeters All tolerances are ±0.10mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating
Subject to change or obsolescence without notice
Rev -
15-Dec-2003
Page 1 of 5
Preliminary Data Sheet
Operating Temperature Range: (2) -30 to +85 oC
Part Number 856327 www.DataSheet4U.com 915 MHz SAW Filter
Electrical Specifications (1)
Parameter (3)
Center Frequency Maximum Insertion Loss 902 - 928 MHz Absolute Attenuation 10 - 857.5 MHz 857.5 - 882.5 MHz 970 - 1005 MHz 1005 - 1110 MHz 1110 - 3000 MHz Amplitude Ripple 902 - 928 MHz Group Delay Variation 902 - 928 MHz Input/Output Return Loss 902 - 928 MHz Source Impedance (5) Load Impedance (5) Notes:
1. 2. 3. 4. 5. All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrica...
Similar Datasheet