EN29SL160

www.DataSheet4U.com EN29SL160 EN29SL160 16 Megabit (2048K x 8-bit / 1024K x 16-bit) Flash Memory Boot Sector Flash Memory, CMOS 1.8 Volt-only FEATURES Single power supply operation - Full voltage range:1.65-2.2 volt for read and write operations. - Regulated voltage range: 1.8-2.2 volt read and write operations High performance - Access times as fast as 90 ns Low power consumption (typical values at 5 MHz) - 7 mA typical active read current - 15 mA typical program/erase current - 0.2 μA typical standby current Flexible Sector Architecture: - Eight 8-Kbyte and thirty-one 64-Kbyte sectors (byte mode) - Eight 4-Kword and thirty-one 32-Kword sectors (word mode) WP#/ACC Input pin: - Write protect (WP#) function allows protection of two outermost boot sectors, regardless of sector protect status - Acceleration (ACC) function acceleration program timing. Sector protection: - Hardware locking of sectors to prevent program or erase operations within individual sectors - Additionally, temporary Sector Unprotect allows code changes in previously locked sectors. High performance program/erase speed - Byte/Word program time: 5µs/7µs typical - Sector erase time: 500ms typical JEDEC Standard Embedded Erase and Program Algorithms JEDEC standard DATA# polling and toggle bits feature Unlock Bypass Program command supported Single Sector and Chip Erase Sector Unprotect Mode Erase Suspend / Resume modes: Read or program another Sector during Erase Suspend Mode Low V...