Document
www.DataSheet4U.com
SPECIFICATION FOR LCM MODULE
MODULE NO.: HY-1602A-201-R DOC. REVISION 02
Customer Approval:
SIGNATURE PREPARED BY (RD ENGINEER) PREPARED BY (QA ENGINEER) CHECKED BY APPROVED BY
DATE Feb-18-2009
w w w . D a t a S h e e t 4 U
DOCUMENT REVISION HISTORY
Version 00 01 02 DATE Jun-14-2005 Sep-07-2005 Feb-18-2009 DESCRIPTION First issue Change IC Character Change corporation LOGO Change SPEC format Modify temperature characteristic CHANGED BY
www.DataSheet4U.com
CONTENTS
1. Functions & Features 2. Mechanical specifications 3. Block diagram 4. Dimensional Outline 5. Pin description 6. Maximum absolute limit 7. Electrical characteristics 8. Backlight specification 9. Electro-Optical characteristics 10. Control and display instruction 11. Font Characteristic 12. Precaution for using LCD/LCM 13. LCM test criteria 1 1 1 2 3 3 4-6 6 7 8 9 10-11 12-21
www.DataSheet4U.com
1. FUNCTIONS & FEATURES
1.1. Format 1.2. LCD mode 1.3. Viewing direction 1.4. Driving scheme 1.5. Power supply voltage (VDD) 1.6. LCD driving voltage 1.7. Operation temp 1.8. Storage temp 1.9. Backlight color 1.10 RoHS standard : 16x2 characters : STN / Positive/Transflective/Y-G : 6 o’clock : 1/16 Duty , 1/5 Bias : 5.0V : 3.9V(reference voltage) : -20~70℃ : -30~80℃ : Bottom ,Yellow-Green
2. MECHANICAL SPECIFICATIONS
2.1. Module size 2.2. Viewing area 2.3. Character pitch 2.4. Character size 2.5. Dot pitch 2.6. Dot size 2.7. Weight : 80.0mm(L)*36.0mm(W)*13.1mm (H) max : 64.3mm(L)*13.7mm(W) : 3.65mm(L)*5.05mm(W) : 2.95mm(L)*4.35mm(W) : 0.60mm(L)*0.55mm(W) : 0.55mm(L)*0.50mm(W)
: Approx.
3. BLOCK DIAGRAM
CONTROL DATA
DRIVE LSI
SPLC100 SEG
VSS VDD Vo RS E R/W DB0−DB7
LEDA LEDK
CONTROL LSI
SPLC780D1-001
COM
LCD Panel LCD MODULE Backlight
VDD(+5.0V)
SEG
Vo VR(0~20K) VSS(0V)
110mA
(Refer Voltage:5.0V)
Figure 1. Block diagram
1
4. DIMENSIONAL OUTLINE
2
REV A00 A01 B
First issue Change IC Change LOGO
DESCRIPTION DATE FEB-23-2006 APR-05-2006 Feb-17-2009
Figure 2. Dimensional outline
PIN PIN 1 9 2 10 3 11 4 12 5 13
PART NO: PROJECTION
6 14
7 15
8 16
SCALE:
FIT
SHEET:
MODULE NUMBER
1
OF
GENERAL TOL: 0.3 ± APPROVALS
1
UNIT mm DATE
APP: CHK:
DO NOT SCALE THIS DRAWING.
www.DataSheet4U.com
DWN:
www.DataSheet4U.com
5. PIN DESCRIPTION
No. 1 2 3 4 5 6 7~14 15 16 Symbol VSS VDD V0 RS R/W E DB0~DB7 LEDA LEDK Function Power ground (0V) Power supply for Logic(+5V) Power supply for LCD drive Register selection (H: Data register , L :Instruction register) Read/write selection (H: Read , L: Write) Enable signal. Data Bus line Power supply for Backlight(Current 110mA,reference voltage +5.0V) Power supply for Backlight(0V)
6. MAXIMUM ABSOLUTE LIMIT
Item Supply Voltage for Logic Supply Voltage for LCD Input Voltage Supply Current for Backlight Reverse Voltage for Backlight Operating Temperature Storage Temperature Symbol VDD V0 Vin IF(Ta = 25°C) VR(Ta = 25°C) Top Tst MIN -0.3 VDD-10.0 -0.3 -----20 -30 MAX 7.0 VDD+0.3 VDD+0.3 145 10.0 70 80 Unit V V V mA V ℃ ℃
3
www.DataSheet4U.com
7. ELECTRICAL CHARACTERISTICS
7.1 DC characteristics (VDD=4.5V-5.5V,TA=25℃)
7.2 AC characteristics(VDD=4.5V-5.5V,TA=25℃) Write mode (writing data from MPU to SPLC780D1)
4
www.DataSheet4U.com
Read mode (reading data from SPLC780D1 to MPU)
5
www.DataSheet4U.com
Interface mode with LCD driver
8. BACKLIGHT CHARACTERISTICS
LCD Module with Bottom Yellow-Green LED Backlight ELECTRICAL RATINGS Ta = 25°C
Unit Item Symbol Condition Min Typ Max Forward Voltage VF IF=110mA 4.0 4.2 4.4 V Reverse Current IR VR=10.0V --110 --uA Luminous Intensity Lv IF=110mA 125 170 --cd/m2 (Without LCD) Peak wave length IF=110mA 569 572 575 Color Yellow-Green Note: when the temperature exceed 25℃, the approved current decrease rate for Backlight change as the temperature increase is: -0.36x11mA/℃(below 25℃, the current refer to constant, which would not change with temperature ).
6
www.DataSheet4U.com
9. ELECTRO-OPTICAL CHARACTERISTICS
( VDD=5.0V, Ta = 25°C ) Item Operating Voltage Response time Contrast Viewing angle range Symbol Vop Tr Tf Cr θ Ф Condition Ta = -20°C Ta = 25°C Ta = 70°C Ta = 25°C Ta = 25°C Cr≥2 Min 4.1 3.5 3.4 -------40 -40 Typ 4.4 3.8 3.6 185 200 4 ----Max 4.7 4.0 3.8 ------+40 +40 Unit V ms ms --deg deg
7
www.DataSheet4U.com
10. CONTROL AND DISPLAY INSTRUCTION
8
www.DataSheet4U.com
11. FONT CHARACTERISTIC
9
www.DataSheet4U.com
12. PRECAUTION FOR USING LCD/LCM
After reliability test, recovery time should be 24 hours minimum. Moreover, functions, performance and appearance shall be free from remarkable deterioration within 50,000 hours (average) under ordinary operating and storage conditions room temperature (20+8°C), normal humidity (below 65% RH), and in the area not exposed to direct sun light. Using LCM beyond these conditions will shorten the life time. Precaution for using LCD/LCM LCD/LCM is assembled and adjusted with a high degree of precision. Do not attempt to make any alteration or modification..