single-ended to differential conversion
SX1701
ADVANCED COMMUNICATION & SENSING PRODUCTS
www.DataSheet4U.com
SX1701 – Datasheet
Highly linear wideband LNA Mult...
Description
SX1701
ADVANCED COMMUNICATION & SENSING PRODUCTS
www.DataSheet4U.com
SX1701 – Datasheet
Highly linear wideband LNA Multi-channel, single-ended to differential conversion
GENERAL DESCRIPTION
The SX1701 is an integrated LNA operating over a wide frequency range from 40 MHz to 2.5 GHz. It is optimized for high OIP2 and OIP3 with minimum current consumption. It also performs a single-ended to differential conversion. Three independent output channels are available and the gain of each may be adjusted independently.
KEY PRODUCT FEATURES
Single-ended input / Triple differential outputs Independent programmable gain for each channel: 6, 12 and 18 dB High Linearity: OIP2 of 57 dBm and OIP3 of 22 dBm Noise Figure of 7 dB 75 Ω Input impedance 100 Ω differential output impedance Current consumption of 130 mA with one channel enabled ESD protection (Normal ESD handling procedures should be observed) Very small package: MLPQ-16, 4 mm x 4 mm (equivalent to QFN-16, 4 mm x 4 mm)
APPLICATIONS
Digital Set Top Boxes (Satellite and Terrestrial) CATV Distribution Systems Active Splitter Data Communications Systems Active Balun
ORDERING INFORMATION
Part number Temperature range Package
Lead Free MLPQ-16 Note: This device is WEEE and RoHS compliant. SX1701I085TRT -40 °C to +85 °C
TYPICAL APPLICATION
+ 5.0 V VDD2 VDD1 GND
SX1701
G3(1:0) OUTP3
Silicon Tuner
TV Tuner
OUTM3 G2(1:0)
RF IN
OUTP2 IN OUTM2 G1(1:0) DEC OUTP1
PIP Tuner
DVR Tuner
OUTM1
G1(1) G1(0)
...
Similar Datasheet