Set and Reset High-Speed Silicon-Gate CMOS
TECHNICAL DATA
www.DataSheet4U.com
KK74ACT112
Dual J-K Flip-Flop with Set and Reset
High-Speed Silicon-Gate CMOS
The ...
Description
TECHNICAL DATA
www.DataSheet4U.com
KK74ACT112
Dual J-K Flip-Flop with Set and Reset
High-Speed Silicon-Gate CMOS
The KK74ACT112 is identical in pinout to the LS/ALS112, HC/HCT112. The KK74ACT112 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. Each flip-flop is negative-edge clocked and has active-low asynchronous Set and Reset inputs. TTL/NMOS Compatible Input Levels Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 4.5 to 5.5 V Low Input Current: 1.0 µA; 0.1 µA @ 25°C Outputs Source/Sink 24 mA
ORDERING INFORMATION KK74ACT112N Plastic KK74ACT112D SOIC TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs Set L H L H H H H H H H PIN 16=VCC PIN 8 = GND Reset H L L H H H H H H H L H Clock X X X J X X X L L H H X X X K X X X L H L H X X X Outputs Q H L L
*
Q L H L* H L
No Change L H
Toggle No Change No Change No Change
* Both outputs will remain low as long as Set and Reset are low, but the output states are unpredictable if Set and Reset go high simultaneously X = Don’t Care
1
www.DataSheet4U.com
KK74ACT112
MAXIMUM RATINGS*
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ St...
Similar Datasheet