VNQ830-E

www.DataSheet4U.com VNQ830-E QUAD CHANNEL HIGH SIDE DRIVER Table 1. General Features Type VNQ830-E (*) Per each channel Figure 1. Package Iout 6A (*) VCC 36V RDS(on) 60mΩ (*) CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS ■ ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETECTION ■ SHORTED LOAD PROTECTION ■ UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN ■ LOSS OF GROUND PROTECTION ■ VERY LOW STAND-BY CURRENT ■ ■ SO-28 (DOUBLE ISLAND) REVERSE BATTERY PROTECTION (**) ■ IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE ■ DESCRIPTION The VNQ830-E is a quad HSD formed by assembling two VND830-E chips in the same SO28 package. The VNQ830-E is a monolithic device made by using| STMicroelectronics VIPower M0-3 Technology. The VNQ830-E is intended for driving any type of multiple loads with one side connected to ground. Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. Output shorted to V CC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Table 2. Order Codes Package Tube VNQ830-E Tape and Reel VNQ830TR-E SO-28 Note: (**) See application schematic at page 10 Rev. 2 November 2004 1/21 VNQ830-E www.DataSheet4U.com Figure 2. Block Diagram VCC1,2 Vcc CLAMP OVERVOLTAGE UNDER...