2-line IPAD EMI filter including ESD protection
EMIF02-MIC01F2
2-line IPAD™, EMI filter including ESD protection
Features
■ 2-line symetrical low-pass filter
■ Lead-...
Description
EMIF02-MIC01F2
2-line IPAD™, EMI filter including ESD protection
Features
■ 2-line symetrical low-pass filter
■ Lead-free package
■ High-density capacitor
t(s) ■ High-efficiency EMI filtering
■ Very small PCB footprint: 1.42 mm x 1.92 mm
uc ■ Very thin package: 0.65 mm rod ■ High-efficiency ESD suppression
(IEC 61000-4-2 level 4)
P ■ High reliability offered by monolithic integration lete Complies with the standards: so ■ IEC 61000-4-2 Level 4 on inputs and outputs b – ±15 kV (air discharge) O – ±8 kV (contact discharge) t(s) - Application c ■ Mobile phones (differential microphone filtering du and ESD protection). Pro Description te The EMIF02-MIC01F2 is a highly integrated le device designed to suppress EMI / RFI noise for o microphone line filtering. bs The EMIF02-MIC01F2 Flip Chip packaging Omeans the package size is equal to the die size.
Flip Chip 11 bumps
Figure 1. Pin configuration (bump side view)
4321 A B C
Figure 2. Schematic
B4 To Mic
C4
GND GND
C1 R1
R2 C2
A4
Meas
GND
GND
C5
GND Vcc
A2
C3 R3 R5
C4
R4 R6
B1
to pre-amp C1codec
This is why the EMIF02-MIC01F2 is a very small C2
device.
GND
GND GND
C6
Additionally, the filter includes an ESD protection circuit to prevent damage to the protected device when subjected to ESD surges up to 15 kV.
GND
A3,B2,B3,C3 are ground pins
GND
GND
TM: IPAD is a trademark of STMicroelectronics.
September 2009
Doc ID 12077 Rev 7
1/7
www.st.com
7
Characteristics
1
Characteristics
EMIF02-MIC01F2
Table 1...
Similar Datasheet