2-line IPAD EMI filter and ESD protection
EMIF02-MIC02F2
2-line IPAD™, EMI filter and ESD protection
Features
■ EMI symmetrical (I/O) low-pass filter
) ■ High e...
Description
EMIF02-MIC02F2
2-line IPAD™, EMI filter and ESD protection
Features
■ EMI symmetrical (I/O) low-pass filter
) ■ High efficiency in EMI filtering t(s ■ Lead-free package c ■ Very low PCB space occupation: u 1.42 mm x 0.92 mm rod ■ Very thin package: 0.65 mm P ■ High efficiency in ESD suppression te ■ High reliability offered by monolithic integration le ■ High reducing of parasitic elements through o integration and wafer level packaging bs Complies with the following standards - O ■ IEC 61000-4-2 level 4 on input pins ) – 15 kV (air discharge) t(s – 8 kV (contact discharge) uc ■ IEC 61000-4-2 level 1 on input pins d – 2 kV (air discharge) ro – 2 kV (contact discharge) te P Applications le Where EMI filtering in ESD sensitive equipment is so required: Ob■ Mobile phones and communication systems
Flip Chip (6 bumps)
Figure 1. Pin configuration (bump side)
3
2
1
I2 GND
I1
A
O2
GND
O1
B
Figure 2. Basic cell configuration
Input
Low-pass Filter
Output
Ri/o = 470 W Cline = 16 pF
■ Computers, printers and MCU Boards
GND
GND
GND
Description
The EMIF02-MIC02 is a highly integrated device designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interference. The EMIF02 Flip-Chip packaging means the package size is equal to the die size.
This filter includes an ESD protection circuitry which prevents damage to the application when subjected to ESD surges up 15 kV.
TM: IPAD is a trademark of STMicroelectronics.
May 2011
Doc ID 10913 Rev 4
1/...
Similar Datasheet