Buffer with 3-State Output
www.DataSheet4U.com
PI74ST1G125
SOTiny™ Gate ST Buffer with 3-State Output
Features
• High-speed: tPD = 1.8ns typical •...
Description
www.DataSheet4U.com
PI74ST1G125
SOTiny™ Gate ST Buffer with 3-State Output
Features
High-speed: tPD = 1.8ns typical Broad operating range: VCC = 1.8V –3.6V Power down high-impedance inputs/outputs High output drive: ±24mA at 3V VCC Packaging: - 5-pin SOT23 (T) Pb-free & Green: - 5-pin SC70 (C)
Description
The PI74ST1G125 is a buffer with 3-state output that operates over the 1.8V to 3.6V VCC operating range. Pericom’s PI74ST series of products are produced using the Company’s advanced submicron technology.
Pin Configuration
Block Diagram
OE
5 VCC
5-Pin T,C
OE 1 AIN 2 GND 3
4 YOUT
AIN
YOUT
Pin Description
Pin Name AIN OE YOUT Description Input Input Output
Recommended Operating Conditions(1)
Parameter Supply Voltage (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature VCC = 1.8V, 2.5V ±0.2V VCC = 3.3V ±0.3V Condition Min. Max. Units 1.8 0 0 -40 0 0 3.6 5.5 VCC 85 20 ns/V 10 ºC V
Function Table
Inputs OE L L H
Notes: 1. H = HIGH Logic Level L = LOW Logic Level X = Don’t Care Z = HIGH Impedance State
Outputs AIN L H X YOUT L H X
Input Rise and Fall Time (tr, tf)
Note: 1. Unused inputs must be held HIGH or LOW. They may not float.
1
PS8521F
05/10/05
PI74ST1G125 SOTiny™ Gate ST www.DataSheet4U.com Buffer with 3-State Output Absolute Maximum Ratings
Supply Voltage (VCC) ................................................ –0.5V to +4V DC Input Voltage (VIN).............................................. –0.5V to +6V DC Output Voltage (VOUT)...
Similar Datasheet