600kHz/200kHz Step-Down DC/DC Converter
600kHz/200kHz www.DataSheet4U.com Step-Down DC/DC Converter
POWER MANAGEMENT Description
The SC2612 is a voltage mode sw...
Description
600kHz/200kHz www.DataSheet4U.com Step-Down DC/DC Converter
POWER MANAGEMENT Description
The SC2612 is a voltage mode switcher designed for low cost, “point of use” voltage conversion. SC2612 is available with fixed switching frequencies of 600kHz (SC2612A) and 200kHz (SC2612C). The SC2612 has soft start and enable functions and is short circuit protected. The output of the switcher may be set anywhere between 0.8V and 75% of Vin. Short circuit protection is disabled during start-up to allow the output capacitors time to fully charge.
SC2612A/C
Features
u u u u u u
Operating frequency of 600kHz or 200kHz Input supply of 3V to 8V 0.5A Drive current for up to 10A output Output voltages down to 0.8V Overcurrent protection and soft start MSOP-8 package
Applications
u Graphics IC Power supplies u Embedded, low cost, high efficiency converters
Typical Application Circuit
12V IN 3.3V IN R1 C10 C1 C2
U2 4 1 2 C5 C7 R9 C9 R10 5 VCC BST 8 7 6 3 R2 R3 Q2 L1 1.5V OUT Q3 R6
COMP DH SS/EN GND DL FB
SC2612
C3
August 18, 2004
1
www.semtech.com
SC2612A/C
POWER MANAGEMENT Absolute Maximum Ratings
Parameter Input Supply Voltage Boost Pin Voltage DL to GND
(2)
www.DataSheet4U.com
Exceeding the specifications below may result in permanent damage to the device, or device malfunction. Operation outside of the parameters specified in the Electrical Characteristics section is not implied.
Symbol VCC VBST
(2)
Maximum 15 20 -1 to +20 0 to 70 125 -65 to 150 300 113 42 2
Units V V V °C °...
Similar Datasheet