GaAs MMIC I/Q MIXER
HMC525
v00.1104
www.DataSheet4U.com
GaAs MMIC I/Q MIXER 4.0 - 8.5 GHz
Typical Applications
The HMC525 is ideal for: •...
Description
HMC525
v00.1104
www.DataSheet4U.com
GaAs MMIC I/Q MIXER 4.0 - 8.5 GHz
Typical Applications
The HMC525 is ideal for: Point-to-Point and Point-to-Multi-Point Radio
Features
Wide IF Bandwidth: DC - 3.5 GHz Image Rejection: 40 dB LO to RF Isolation: 50 dB High Input IP3: +23 dBm
3
MIXERS - CHIP
VSAT
Functional Diagram
General Description
The HMC525 is a compact I /Q MMIC mixer which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The chip utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated in a GaAs MESFET process. All data shown below is taken with the chip mounted in a 50 Ohm test fixture and includes the effects of 1 mil diameter x 20 mil length bond wires on each port. A low frequency quadrature hybrid was used to produce a 100 MHz USB IF output. This product is a much smaller alternative to hybrid style Image Reject Mixers and Single Sideband Upconverter assemblies.
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +15 dBm*
Parameter Frequency Range, RF/LO Frequency Range, IF Conversion Loss (As IRM) Image Rejection 1 dB Compression (Input) LO to RF Isolation LO to IF Isolation IP3 (Input) Amplitude Balance Phase Balance 33 17 20 Min. Typ. 4.0 - 8.5 DC - 3.5 7.5 35 +14 45 20 +23 0.3 8 40 17 10 30 Max. Min. Typ. 5.5 - 7.5 DC - 3.5 7.5 40 +15 50 20 +23 0.2 4 9.5 Max. Units GHz GHz dB dB dBm dB dB dBm dB Deg
* Unless otherwise noted, all measurements performed as downconverter.
3 - 150
...
Similar Datasheet