14-Bit/ 500Msps Interpolating and Modulating Dual DAC with CMOS Inputs
19-3631; Rev 2; 10/08
KIT ATION EVALU LE B A IL A AV
www.DataSheet4U.com
14-Bit, 500Msps, Interpolating and Modulatin...
Description
19-3631; Rev 2; 10/08
KIT ATION EVALU LE B A IL A AV
www.DataSheet4U.com
14-Bit, 500Msps, Interpolating and Modulating Dual DAC with CMOS Inputs
General Description
The MAX5894 programmable interpolating, modulating, 500Msps, dual digital-to-analog converter (DAC) offers superior dynamic performance and is optimized for highperformance wideband, single-carrier transmit applications. The device integrates a selectable 2x/4x/8x interpolating filter, a digital quadrature modulator, and dual 14-bit, high-speed DACs on a single integrated circuit. At 30MHz output frequency and 500Msps update rate, the in-band SFDR is 86dBc while consuming 1.1W. The device also delivers 73dB ACLR for two-carrier WCDMA at a 61.44MHz output frequency. The selectable interpolating filters allow lower input data rates while taking advantage of the high DAC update rates. These linear-phase interpolation filters ease reconstruction filter requirements and enhance the passband dynamic performance. Individual offset and gain programmability allow the user to calibrate out local oscillator (LO) feedthrough and sideband suppression errors generated by analog quadrature modulators. The MAX5894 features a fIM/4 digital image-reject modulator. This modulator generates a quadrature-modulated IF signal that can be presented to an analog I/Q modulator to complete the upconversion process. A second digital modulation mode allows the signal to be frequency-translated with image pairs at fIM/2 or fIM/4. The MAX589...
Similar Datasheet