DatasheetsPDF.com

/ DRIVER. STE2004 Datasheet

DatasheetsPDF.com

/ DRIVER. STE2004 Datasheet






STE2004 DRIVER. Datasheet pdf. Equivalent




STE2004 DRIVER. Datasheet pdf. Equivalent





Part

STE2004

Description

102 X 65 SINGLE CHIP LCD CONTROLLER / DRIVER

Manufacture

STMicroelectronics

Datasheet
Download STE2004 Datasheet


STMicroelectronics STE2004

STE2004; www.DataSheet4U.com STE2004 102 X 65 S INGLE CHIP LCD CONTROLLER / DRIVER 1 ■ ■ ■ ■ ■ ■ ■ ■ FEAT URES 102 x 65 bits Display Data RAM Pro grammable MUX rate Programmable Frame R ate X,Y Programmable Carriage Return Du al Partial Display Mode Row by Row Scro lling N-Line Inversion Automatic data R AM Blanking procedure Selectable Input Interface: • I2C Bus Fast and Hs-mod.


STMicroelectronics STE2004

e (read and write) • 68000 & 8080 Para llel Interfaces (read and write) • 3- lines and 4-lines SPI Interface (read a nd write) • 3-lines 9 bit Serial Inte rface (read and write) Fully Integrated Oscillator requires no external compon ents CMOS Compatible Inputs Fully Integ rated Configurable LCD bias voltage gen erator with: • Selectable multiplicat ion factor (up to 5X) • Ef.


STMicroelectronics STE2004

fective sensing for High Precision Outpu t • Eight selectable temperature comp ensation coefficients Designed for chip -on-glass (COG) applications. ■ ■ ■ ■ ■ Low Power Consumption, sui table for battery operated systems Logi c Supply Voltage range from 1.7 to 3.6V High Voltage Generator Supply Voltage range from 1.75 to 4.5V Display Supply Voltage range from 4.5 to 14.5.



Part

STE2004

Description

102 X 65 SINGLE CHIP LCD CONTROLLER / DRIVER

Manufacture

STMicroelectronics

Datasheet
Download STE2004 Datasheet




 STE2004
STE2004www.DataSheet4U.com
102 X 65 SINGLE CHIP LCD CONTROLLER / DRIVER
1 FEATURES
102 x 65 bits Display Data RAM
Programmable MUX rate
Programmable Frame Rate
X,Y Programmable Carriage Return
Dual Partial Display Mode
Row by Row Scrolling
N-Line Inversion
Automatic data RAM Blanking procedure
Selectable Input Interface:
• I2C Bus Fast and Hs-mode (read and write)
• 68000 & 8080 Parallel Interfaces (read and write)
• 3-lines and 4-lines SPI Interface (read and write)
• 3-lines 9 bit Serial Interface (read and write)
Fully Integrated Oscillator requires no external
components
CMOS Compatible Inputs
Fully Integrated Configurable LCD bias voltage
generator with:
• Selectable multiplication factor (up to 5X)
• Effective sensing for High Precision Output
• Eight selectable temperature compensation
coefficients
Designed for chip-on-glass (COG) applications.
Low Power Consumption, suitable for battery
operated systems
Logic Supply Voltage range from 1.7 to 3.6V
High Voltage Generator Supply Voltage range
from 1.75 to 4.5V
Display Supply Voltage range from 4.5 to 14.5V
Backward Compatibility with STE2001/2
2 DESCRIPTION
The STE2004 is a low power CMOS LCD control-
ler driver. Designed to drive a 65 rows by 102 col-
umns graphic display, it provides all necessary
functions in a single chip, including on-chip LCD
supply and bias voltages generators, resulting in a
minimum of externals components and in a very
low power consumption.
STE2004 features six standard interfaces (3-lines
Serial, 3-lines SPI, 4-lines SPI, 68000 Parallel,
8080 parallel & I2C) for ease of interfacing with the
host micro-controller
Table 1. Order Codes
Part Numbers
Type
STE2004DIE1
STE2004DIE2
Bumped Wafers
Bumped Dice on Waffle Pack
Figure 1. Block Diagram
CO to C101
R0 to R64
OSC_IN
OSC_OUT
FR_IN
FR_OUT
VSENSE SLAVE
VLCD
VLCDSENSE
RES
VSSAUX
VDD1,2
VSS
SEL1,2
OSC
MASTER
SLAVE SYNC
BIAS VOLTAGE
GENERATOR
TIMING
GENERATOR
CLOCK
COLUMN
DRIVERS
DATA
LATCHES
ROW
DRIVERS
SHIFT
REGISTER
HIGH VOLTAGE
GENERATOR
RESET
DATA
REGISTER
65 x 102
RAM
SCROLL
LOGIC
TEST
INSTRUCTION
REGISTER
DISPLAY
CONTROL
LOGIC
I2C BUS 9 Bit SERIAL 3 & 4 Line SPI Parallel 8080 Parallel 68K
TEST_MODE
TEST_VREF
ICON_MODE
EXT
SEL 0
SEL 1
SEL 2
July 2004
SA1 SAO SDOUT SCLK/SCL SDIN/SDA_IN SDA_OUT DB0 E/WR R/W- RD D/C
to
DB7
CS
LR0047
Rev. 4
1/66





 STE2004
STE2004
Table 2. Pin Description
N° Pad
R0 to R64
1-6
109-141
C0 to C101
6-107
VSS 192-203
VDD1
156-163
VDD2
164-171
VLCD
205-209
VLCDSENSE
204
VSENSE_SLAVE
145
VSSAUX
190-177-
147
VDD1AUX
142
SEL1,2,3
152
153
154
Type
O
O
GND
Supply
Supply
Supply
Supply
Supply
O
O
I
LCD Row Driver Output
Function
www.DataSheet4U.com
LCD Column Driver Output
Ground pads.
IC Positive Power Supply
Internal Generator Supply Voltages.
Voltage Multiplier Output
Voltage Multiplier Regulation Input. VLCDOUT Sensing for Output Voltage Fine Tuning
Voltage reference for SLAVE CHARGE PUMP
Ground Reference for Pins Configuration
VDD1 Reference for Pins Configuration
Interface Mode Selection - CANNOT BE LEFT FLOATING
SEL3
SEL2
SEL1
GND / VSSAUX GND / VSSAUX GND / VSSAUX
GND / VSSAUX GND / VSSAUX
GND / VSSAUX
VDD1
GND / VSSAUX
VDD1
VDD1
GND / VSSAUX
VDD1
GND / VSSAUX
VDD1
GND / VSSAUX
VDD1
GND / VSSAUX
VDD1
Interface
I2C
SPI 4-Lines 8 bit
SPI 3-Lines 8 bit
Serial 3-Lines 9 bit
Parallel 8080-series
Parallel 68000-series
EXT_SET
151
ICON_MODE
155
SDOUT
SDIN - SDAIN
180
179
SCLK - SCL
181
SDA_OUT
SA0
SA1
DB0 to DB7
R/W - RD
178
149
148
182-189
175
E / WR
176
I Extended Instruction Set Selection - CANNOT BE LEFT FLOATING
EXT PAD CONFIG
INSTRUCTION SET SELECTED
GND or VSSAUX
BASIC
VDD1
EXTENDED
I Extended Instruction Set Selection - CANNOT BE LEFT FLOATING
ICON MODE PAD CONFIG
ICON MODE STATUS
GND or VSSAUX
DISBLED
VDD1
ENABLED
O Serial & SPI Data Output - IF UNUSED MUST BE LEFT FLOATING
I SDIN - Serial & SPI Interface Data Input - CANNOT BE LEFT FLOATING
I SDAIN - I2C Bus Data In - CANNOT BE LEFT FLOATING
I SCLK - Serial & SPI Interface Clock - CANNOT BE LEFT FLOATING
I SCL - I2C bus Clock - CANNOT BE LEFT FLOATING
O I2C Bus Data Out IF UNUSED MUST BE LEFT FLOATING
I I2C Slave Address BIT 0 - CANNOT BE LEFT FLOATING
I I2C Slave Address BIT 1- CANNOT BE LEFT FLOATING
I/O Parallel Interface 8 Bit Data Bus - CANNOT BE LEFT FLOATING
I R/W - 68000 Series Parallel Interface Read & Write Control Input
- CANNOT BE LEFT FLOATING
I RD - 8080 Series Parallel Interface Read enable Clock Input
- CANNOT BE LEFT FLOATING
I E - 68000 Series Parallel Interface Read & Write Clock Input
- CANNOT BE LEFT FLOATING
2/66





 STE2004
STE2004
Table 2. Pin Description (continued)
N° Pad Type
Function
www.DataSheet4U.com
E / WR
176
I WR - 8080 Series Parallel Interface - Write enable clock input
- CANNOT BE LEFT FLOATING
RES 172 I Reset Input. Active Low.
D/C 174 I Interface Data/Command Selector- CANNOT BE LEFT FLOATING
CS 173 I Serial & Parallel Interfaces ENABLE. When Low the Incoming Data are Clocked In.
CANNOT BE LEFT FLOATING
TEST_MODE
191
I Test Pad - 50 kohm internal Pull-down MUST BE CONNECTED TO VSS/VSSAUX
TEST_VREF
146
O Test Pad - MUST BE LEFT FLOATING
OSCIN
144
I Oscillator Input:
OSC_IN
Configuration
High Internal Oscillator Enabled
Low Internal Oscillator Disabled
External Scillator
Internal Oscillator Disabled
OSCOUT
FR_OUT
FR_IN
M/S
210
211
143
100
O Internal/External Oscillator Out - IF UNUSED MUST BE LEFT FLOATING
O Master Slave Frame Inversion Synchronization.
IF UNUSED MUST BE LEFT FLOATING
I Master Slave Frame Inversion Synchronization.
CANNOT BE LEFT FLOATING
I Master/Slave Configuration Bit:- CANNOT BE LEFT FLOATING
M/S PIN
High
Low
OSC_OUT
ENABLED
ENABLED
FR_OUT
Enabled
Enabled
FR_IN
Disabled
Enabled
Charge Pump
AuxVsense Disabled
Charge Pump in Slave Mode or Ext
Power
3/66



Recommended third-party STE2004 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)