DatasheetsPDF.com

Linearity LNA. AMMP-6222 Datasheet

DatasheetsPDF.com

Linearity LNA. AMMP-6222 Datasheet






AMMP-6222 LNA. Datasheet pdf. Equivalent




AMMP-6222 LNA. Datasheet pdf. Equivalent





Part

AMMP-6222

Description

7 to 21 GHz GaAs High Linearity LNA



Feature


AMMP-6222 7 to 21 GHz GaAs High Lineari ty LNA in SMT Package www.DataSheet4U. com Data Sheet Description Avago Tech nologies’ AMMP-6222 is an easy-to-use broadband, high gain, high linearity L ow Noise Amplifier in a surface mount p ackage. The wide band and unconditional ly stable performance makes this MMIC i deal as a primary or sub-sequential low noise block or a tr.
Manufacture

AVAGO TECHNOLOGIES

Datasheet
Download AMMP-6222 Datasheet


AVAGO TECHNOLOGIES AMMP-6222

AMMP-6222; ansmitter or LO driver. The MMIC has 3 g ain stages and a selectable pin to swit ch between low and high current, corres ponding with low and high output power and linearity. In the high current, hig h output power state, it requires a 4V, 120mA supply. In the low current, low output power state, the supply is reduc ed to 4V, 95mA. Since this MMIC covers several bands, it .


AVAGO TECHNOLOGIES AMMP-6222

can reduce part inventory and increase v olume purchase options The MMIC is fabr icated using PHEMT technology. The surf ace mount package eliminates the need o f “chip & wire” assembly for lower cost. This MMIC is fully SMT compatible with backside grounding and I/Os. Fea tures • • • • • • • • • Surface Mount Package, 5.0 x 5.0 x 1.25 mm Single Positive Bias Pin.


AVAGO TECHNOLOGIES AMMP-6222

Selectable Output Power / Linearity No Negative Gate Bias Specifications (Vdd = 4.0V, Idd = 120mA) RF Frequencies: 7 - 21 GHz High Output IP3: 29dBm High S mall-Signal Gain: 24dB Typical Noise Fi gure: 2.3dB Input, Output Match: -10dB Applications • Microwave Radio syst ems • Satellite VSAT, DBS Up/Down Li nk • LMDS & Pt-Pt mmW Long Haul • Broadband Wireless Access.

Part

AMMP-6222

Description

7 to 21 GHz GaAs High Linearity LNA



Feature


AMMP-6222 7 to 21 GHz GaAs High Lineari ty LNA in SMT Package www.DataSheet4U. com Data Sheet Description Avago Tech nologies’ AMMP-6222 is an easy-to-use broadband, high gain, high linearity L ow Noise Amplifier in a surface mount p ackage. The wide band and unconditional ly stable performance makes this MMIC i deal as a primary or sub-sequential low noise block or a tr.
Manufacture

AVAGO TECHNOLOGIES

Datasheet
Download AMMP-6222 Datasheet




 AMMP-6222
AMMP-6222
7 to 21 GHz GaAs High Linearity LNA in SMT Package
Data Sheet
www.DataSheet4U.com
Description
Avago Technologies’ AMMP-6222 is an easy-to-use
broadband, high gain, high linearity Low Noise Amplifier
in a surface mount package. The wide band and
unconditionally stable performance makes this MMIC
ideal as a primary or sub-sequential low noise block or a
transmitter or LO driver. The MMIC has 3 gain stages and
a selectable pin to switch between low and high current,
corresponding with low and high output power and
linearity. In the high current, high output power state, it
requires a 4V, 120mA supply. In the low current, low output
power state, the supply is reduced to 4V, 95mA. Since this
MMIC covers several bands, it can reduce part inventory
and increase volume purchase options The MMIC is
fabricated using PHEMT technology. The surface mount
package eliminates the need of “chip & wire” assembly
for lower cost. This MMIC is fully SMT compatible with
backside grounding and I/Os.
Pin Connections (Top View)
123
100pF
84
76
5
Top view
Package base: GND
Pin Function
1
2 Vdd
3
4 RFout
5 Current Sel
6
7
8 RFin
Features
Surface Mount Package, 5.0 x 5.0 x 1.25 mm
Single Positive Bias Pin
Selectable Output Power / Linearity
No Negative Gate Bias
Specifications (Vdd = 4.0V, Idd = 120mA)
RF Frequencies: 7 - 21 GHz
High Output IP3: 29dBm
High Small-Signal Gain: 24dB
Typical Noise Figure: 2.3dB
Input, Output Match: -10dB
Applications
Microwave Radio systems
Satellite VSAT, DBS Up/Down Link
LMDS & Pt-Pt mmW Long Haul
Broadband Wireless Access
(including 802.16 and 802.20 WiMax)
WLL and MMDS loops
Commercial grade military
Note:
1. This MMIC uses depletion mode pHEMT devices.
Attention:
Observe precautions for
handling electrostatic
sensitive devices.
ESD Machine Model (60V)
ESD Human Body Model (150V)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control





 AMMP-6222
Absolute Maximum Ratings (1)
www.DataSheet4U.com
Parameters/Condition
Drain to Ground Voltage
Drain Current
RF CW Input Power Max
Max channel temperature
Storage temperature
Maximum Assembly Temp
Symbol
Vdd
Idd
Pin
Tch
Tstg
Tmax
Unit
V
mA
dBm
C
C
C
Maximum
5.5
170
10
+150
-65 +150
260 for 20s
1. Operation in excess of any of these conditions may result in permanent damage to this device. The absolute maximum ratings for Vdd, Idd and Pin
were determined at an ambient temperature of 25°C unless noted otherwise.
DC Specifications/ Physical Properties (2)
Parameter and Test Condition
Symbol
Unit
Minimum
Drain Supply Current under any RF power drive and temp. (Vd=4.0 V)
Idd
mA 80
Drain Supply Voltage
Vd V 3
Thermal Resistance(3)
θjc °C/W
2. Ambient operational temperature TA=25°C unless noted
3. Channel-to-backside Thermal Resistance (Tchannel = 34°C) as measured using infrared microscopy.
Thermal Resistance at backside temp. (Tb) = 25°C calculated from measured data.
Typical
120
4
31.4
Maximum
160
5
AMMP-6222 RF Specifications (4)
TA= 25°C, Idd=120mA, Vdd = 4.0 V, Zo=50 W
Parameters and Test Conditions
Freq.
Symbol Units (GHz)
High Output Power Configuration Low Output Power Configuration
Minimum Typical Maximum Minimum Typical Maximum
Drain Current
Idd mA
120
95
Small-Signal Gain (5)
Gain dB 9, 12, 17 19
24
23
Noise Figure into 50W (5)
NF dB 9, 12, 17
2.3 3.5
2.3
Output Power at 1dB Gain Compression P-1dB dBm
15.5
14
Output Power at 3dB Gain Compression P-3dB dBm
17.5
16
Output Third Order Intercept Point
OIP3 dBm
29
27
Isolation
Iso dB
-45
-45
Input Return Loss
RLin dB
-10
-10
Output Return Loss
RLout dB
-10
-10
4. Refer to characteristic plots for detailed individual frequency performance.
5. All tested parameters guaranteed with measurement accuracy ± 0.5dB for gain and ±0.3dB for NF in the high output power configuration.





 AMMP-6222
AMMP-6222 Typical Performance for High Current, High Output Power Configuration [1], [2]
(TA = 25°C, Vdd=4V, Idd=120mA, Zin = Zout = 50 W unless noted)
www.DataSheet4U.com
30
25
20
15
10
5
5 10 15 20
Frequency (GHz)
Figure 1a. Small-signal Gain
25
5
4
3
2
1
0
6 8 10 12 14 16 18 20 22
Frequency (GHz)
Figure 2a. Noise Figure
0
-5
-10
-15
-20
-25
5
10 15 20
Frequency (GHz)
Figure 3a. Input Return Loss
0
-5
-10
-15
-20
5
10 15 20
Frequency (GHz)
Figure 5a. Output Return Loss
25
25
20
15
10
5
0
6 8 10 12 14 16 18 20 22
Frequency (GHz)
Figure 4a. Output P-1dB
35
30
25
20
15
10
6 8 10 12 14 16 18 20 22
Frequency (GHz)
Figure 6a. Output IP3
Note:
1. S-parameters are measured with R&D Eval Board as shown in Figure 21. Board and connector effects are included in the data.
2. Noise Figure is measured with R&D Eval board as shown in Figure 21, and with a 3-dB pad at input. Board and connector losses are already de-
embeded from the data.







Recommended third-party AMMP-6222 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)