DatasheetsPDF.com

Noise Amplifer. AMMP-6233 Datasheet

DatasheetsPDF.com

Noise Amplifer. AMMP-6233 Datasheet






AMMP-6233 Amplifer. Datasheet pdf. Equivalent




AMMP-6233 Amplifer. Datasheet pdf. Equivalent





Part

AMMP-6233

Description

18 to 32 GHz GaAs Low Noise Amplifer



Feature


AMMP-6233 www.DataSheet4U.com 18 to 32 GHz GaAs Low Noise Amplifier Data She et Description Avago Technologies’ A MMP-6233 is a high gain, lownoise ampli fier that operates from 18 GHz to 32 GH z. It has a 3 dB noise figure, over 20 dB of gain and designed to be an easy-t o-use drop-in with any surface mount PC B application. Popular applications inc lude microwave radio.
Manufacture

AVAGO TECHNOLOGIES

Datasheet
Download AMMP-6233 Datasheet


AVAGO TECHNOLOGIES AMMP-6233

AMMP-6233; s, 802.16 and satellite VSAT or DBS rece ivers. The fully integrated microwave c ircuit eliminated the complex tuning an d assembly processes typically required by hybrid (discrete-FET) amplifiers. T he surface mount package allows elimina tion of “chip & wire” assembly for lower cost. The device has 50 Ω input and output match and is unconditionall y stable. The MMIC has f.


AVAGO TECHNOLOGIES AMMP-6233

ully integrated input and output DC bloc king capacitors and bias choke. The bac kside of the package is both RF and DC ground that simplifies the assembly pro cess. It is fabricated in a PHEMT proce ss to provide exceptional low noise and gain performance. Features • Surfa ce Mount Package, 5.0 x 5.0 x 1.25 mm Integrated DC block and choke • 50 Ω Input and Output Ma.


AVAGO TECHNOLOGIES AMMP-6233

tch • Single Positive Supply Pin • No Negative Gate Bias Specifications (Vd=3.0V, Idd=65mA) • Broadband RF f rom 18 to 32 GHz • High Gain of 23dB • Low Gain Flatness: ± 1dB • Ty pical Noise Figure of 2.6 dB • Typic al OIP3 of 19dBm Pin Connections (Top View) 1 2 3 Pin 1 2 3 4 5 6 7 8 Functio n Vdd RFout Applications • Microwav e Radio systems • Satellite VSAT, .

Part

AMMP-6233

Description

18 to 32 GHz GaAs Low Noise Amplifer



Feature


AMMP-6233 www.DataSheet4U.com 18 to 32 GHz GaAs Low Noise Amplifier Data She et Description Avago Technologies’ A MMP-6233 is a high gain, lownoise ampli fier that operates from 18 GHz to 32 GH z. It has a 3 dB noise figure, over 20 dB of gain and designed to be an easy-t o-use drop-in with any surface mount PC B application. Popular applications inc lude microwave radio.
Manufacture

AVAGO TECHNOLOGIES

Datasheet
Download AMMP-6233 Datasheet




 AMMP-6233
AMMP-6233
18 to 32 GHz GaAs Low Noise Amplifier
Data Sheet
www.DataSheet4U.com
Description
Avago Technologies’ AMMP-6233 is a high gain, low-
noise amplifier that operates from 18 GHz to 32 GHz. It
has a 3 dB noise figure, over 20 dB of gain and designed
to be an easy-to-use drop-in with any surface mount PCB
application. Popular applications include microwave ra-
dios, 802.16 and satellite VSAT or DBS receivers. The fully
integrated microwave circuit eliminated the complex
tuning and assembly processes typically required by
hybrid (discrete-FET) amplifiers. The surface mount pack-
age allows elimination of “chip & wire” assembly for lower
cost. The device has 50 input and output match and
is unconditionally stable. The MMIC has fully integrated
input and output DC blocking capacitors and bias choke.
The backside of the package is both RF and DC ground
that simplifies the assembly process. It is fabricated in
a PHEMT process to provide exceptional low noise and
gain performance.
Pin Connections (Top View)
123
765
Pin Function
1
2 Vdd
3
4 RFout
5
6
7
8 RFin
Features
Surface Mount Package, 5.0 x 5.0 x 1.25 mm
Integrated DC block and choke
50 Input and Output Match
Single Positive Supply Pin
No Negative Gate Bias
Specifications (Vd=3.0V, Idd=65mA)
Broadband RF from 18 to 32 GHz
High Gain of 23dB
Low Gain Flatness: ± 1dB
Typical Noise Figure of 2.6 dB
Typical OIP3 of 19dBm
Applications
Microwave Radio systems
Satellite VSAT, DBS Up/Down Link
LMDS & Pt-Pt mmW Long Haul
Broadband Wireless Access
(including 802.16 and 802.20 WiMax)
WLL and MMDS loops
Commercial grade military
Note: These devices are ESD sensitive. The following precautions are strongly recommended. Ensure
that an ESD approved carrier is used when units are transported from one destination to another.
Personal grounding is to be worn at all times when handling these devices. The manufacturer as-
sumes no responsibilities for ESD damage due to improper storage and handling of these devices.




 AMMP-6233
Absolute Maximum Ratings (1)
Sym Parameters/Condition
Unit Max
Vd Drain to Ground Voltage
V 5.5
Id Drain Current
mA 100
Pin RF CW Input Power Max
dBm 10
Tch Max channel temperature
C
+150
Tstg Storage temperature
C -65 +150
Tmax Maximum Assembly Temp C
260 for 20s
Notes:
1. Operation in excess of any of these conditions may result in per-
manent damage to this device. The absolute maximum ratings for
Vd, Id and Pin were determined at an ambient temperature of 25°C
unless noted otherwise.
www.DataSheet4U.com
DC Specifications/ Physical Properties (2)
Parameter and Test
Sym Condition
Unit Min Typ Max
Idd Drain Supply Cur-
mA 40 65 90
rent under any RF
power drive and temp.
(Vdd=3.0 V)
Vd Drain Supply Voltage V
35
qjc Thermal Resistance(3) C/W
27
Notes:
2. Ambient operational temperature TA=25°C unless noted
3. Channel-to-backside Thermal Resistance (Tchannel = 34°C) as mea-
sured using infrared microscopy. Thermal Resistance at backside
temp. (Tb) = 25°C calculated from measured data.
AMMP-6233 RF Specifications (4,5,6)
TA= 25°C, Vdd=3.0 V, Idd= 65 mA, Zin=Zo=50
Symbol
Parameters and Test Conditions
Freq Units Min. Typ. Max.
Freq Operational Frequency
GHz 18
32
Gain RF Small Signal Gain
18GHz
dB
19
23.2
26GHz
dB
20.8 24.4
29GHz
dB
20
23.6
NF Noise Figure into 50W
18GHz
26GHz
dB
dB
2.6 3.6
2.2 3.2
29GHz
dB
2.6 3.5
Rlin Input Return Loss
dB -10
Rlout
Output Return Loss
dB -13
Iso Isolation
dB -45
P1dB
Output Power at 1dB gain compression
dBm 8
OIP3 Output Third Order Intercept Point
dBm 18
Notes:
4. Small/Large -signal data measured in a fully de-embedded test fixture form TA = 25°C.
5. Specifications are derived from measurements in a 50 test environment. Aspects of the amplifier performance may be improved over a nar-
rower bandwidth by application of additional conjugate, linearity, or low noise (Gopt) matching.
6. All tested parameters guaranteed with measurement accuracy +/-0.5dB for NF and +/-1dB for gain at 18GHz, 26GHz and +/-1.5dB for gain at
29GHz.





 AMMP-6233
AMMP-6233 Typical Performance [1], [2]
(TA = 25°C, Vdd=3V, Idd=65mA, Zin = Zout = 50 unless noted)
www.DataSheet4U.com
25
20
15
10
5
0
15
Figure 1. Gain
20 25 30
Frequency (GHz)
6.0
5.0
4.0
3.0
2.0
1.0
0.0
35 18 20 22 24 26 28 30 32
Frequency (GHz)
Figure 2. Noise Figure
0
-5
-10
-15
-20
-25
-30
15
20 25 30
Frequency (GHz)
Figure 3. Input Return Loss
25
20
15
10
5 OP-1dB
OIP3
35
0
18 20 22 24 26 28 30 32
Frequency (GHz)
Figure 4. Output P-1dB and Output IP3
0
-5
-10
-15
-20
-25
-30
15 20 25
Frequency (GHz)
Figure 5. Output Return Loss
30
35
0
-10
-20
-30
-40
-50
-60
15
Figure 6. Isolation
20 25 30
Frequency (GHz)
35







Recommended third-party AMMP-6233 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)