DatasheetsPDF.com

CFD-G770CPK Dataheets PDF



Part Number CFD-G770CPK
Manufacturers Sony
Logo Sony
Description CD RADIO CASSETTE-CORDER
Datasheet CFD-G770CPK DatasheetCFD-G770CPK Datasheet (PDF)

CFD-G700CP/G770CP/ G770CPK www.DataSheet4U.com SERVICE MANUAL Ver. 1.0 2007.03 US Model CFD-G700CP Canadian Model CFD-G770CPK E Model CFD-G770CP/G770CPK Australian Model CFD-G770CPK Photo : CFD-G770CPK Model Name Using Similar Mechanism CD Section TAPE Section CD Mechanism Type Optical Pick-up Type Model Name Using Similar Mechanism Tape Transport Mechanism Type CFD-G505/G555CP/G555CPK KSM-213CDP/C2NP KSS-213C HCD-EC50 H21SB-C05 SPECIFICATIONS AUDIO POWER SPECIFICATIONS (US) POWER OUTPU.

  CFD-G770CPK   CFD-G770CPK



Document
CFD-G700CP/G770CP/ G770CPK www.DataSheet4U.com SERVICE MANUAL Ver. 1.0 2007.03 US Model CFD-G700CP Canadian Model CFD-G770CPK E Model CFD-G770CP/G770CPK Australian Model CFD-G770CPK Photo : CFD-G770CPK Model Name Using Similar Mechanism CD Section TAPE Section CD Mechanism Type Optical Pick-up Type Model Name Using Similar Mechanism Tape Transport Mechanism Type CFD-G505/G555CP/G555CPK KSM-213CDP/C2NP KSS-213C HCD-EC50 H21SB-C05 SPECIFICATIONS AUDIO POWER SPECIFICATIONS (US) POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 3.2-ohm loads, both channels driven from 1 000 - 10 000 Hz; rated 3 W per channel-minimum RMS power, with no more than 10 % total harmonic distortion in AC operation. Woofer with 4-ohm loads, driven from 50 - 150 Hz; rated 6 W minimum RMS power, with no more than 10 % total harmonic distortion in AC operation. Other specifications CD player section System Compact disc digital audio system Laser diode properties Emission duration: Continuous Laser output: Less than 44.6 µW (Th is output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Number of channels 2 Frequency response 20 - 20 000 Hz +1/–2 dB Wow and fl utter Below measurable limit • Abbreviation AUS : Australian model CND : Canadian model E41 : AC 230V area in E model E92 MX SP Radio section Frequency range FM: 87.5 - 108 MHz AM: 530 - 1 710 kHz (G700CP: US/G770CPK: CND, MX, E92) AM: 531 - 1 611 kHz (G770CPK: AUS) AM: 531 - 1 611 kHz (9 kHz step)(G770CP) AM: 530 - 1 610 kHz (10 kHz step)(G770CP) Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna Cassette-corder section Recording system 4-track 2 channel stereo Fast winding time Approx. 150 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 70 - 13 000 Hz General Speaker Full range: 10 cm (4 in.) dia., 3.2 Ω, cone type (2) Woofer: 13 cm (5 1/8 in.) dia., 4 Ω, cone type (1) Tweeter: 2 cm (13/16 in.) dia. (2) Input Built-in audio cable with stereo-mini plug: Minimum input level 245 mV AUDIO IN Jack (stereo minijack): Minimum input level 245 mV MIC MIX (microphone) jack (monaural minijack): Sensitivity 2.5 mV, for low impedance microphone Minimum input level 2.5 mV (G770CPK) Outputs Headphones jack (stereo minijack) For 16 - 68 Ω impedance headphones Power output 4 W + 4 W (at 3.2 Ω, 10% harmonic distortion) Woofer: 12 W (at 4 Ω, 10% harmonic distortion) Power requirements For CD radio cassette-corder: 120 V AC, 60 Hz (G700CP: US/G770CPK: CND, MX, E92) 230 - 240 V AC, 50 Hz (G700CP: SP) 230 V AC, 50 Hz (G700CP: E41/G770CPK: AUS) 12 V DC, 8 R20 (size D) batteries For remote control: 3 V DC, 2 R6 (size AA) batteries Power consumption AC 28 W — Continued on next page — : AC 120V area in E model : Mexican model : Singapore model CD RADIO CASSETTE-CORDER 9-887-620-01 2007C16-1 © 2007.03 Sony Corporation Personal Audio Division Published by Sony Techno Create Corporation CFD-G700CP/G770CP/G770CPK www.DataSheet4U.com Battery life For CD radio cassette-corder: FM recording Sony R20P: approx. 6 h Sony alkaline LR20: approx. 18 h Tape playback Sony R20P: approx. 1.5 h Sony alkaline LR20: approx. 6 h CD playback Sony R20P: approx. 1 h Sony alkaline LR20: approx. 4 h Dimensions Approx. 551 × 247 × 370 mm (w/h/d) (21 3/4 × 9 3/4 × 14 5/8 inches) (incl. projecting parts) Mass Approx. 8.4 kg (18 lb. 9 oz) (incl. batteries) Supplied accessories AC power cord (1) Remote control (1) Design and specifications are subject to change without notice. Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing • Keep the temperature of soldering iron around 270˚C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size) : LEAD FREE MARK Unleaded solder has the following characteristics. • Unleaded solder melts at a temperature about 40 °C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350 °C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! • Strong viscosity Unleaded solder is more viscou-s (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. SAFETY-R.


C1707 CFD-G770CPK CFD-G770CP


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)