DatasheetsPDF.com

RADIO CASSETTE-CORDER. CFD-G770CP Datasheet

DatasheetsPDF.com

RADIO CASSETTE-CORDER. CFD-G770CP Datasheet






CFD-G770CP CASSETTE-CORDER. Datasheet pdf. Equivalent




CFD-G770CP CASSETTE-CORDER. Datasheet pdf. Equivalent





Part

CFD-G770CP

Description

CD RADIO CASSETTE-CORDER



Feature


CFD-G700CP/G770CP/ G770CPK www.DataSheet 4U.com SERVICE MANUAL Ver. 1.0 2007.03 US Model CFD-G700CP Canadian Model C FD-G770CPK E Model CFD-G770CP/G770CPK Australian Model CFD-G770CPK Photo : CFD-G770CPK Model Name Using Similar M echanism CD Section TAPE Section CD Mec hanism Type Optical Pick-up Type Model Name Using Similar Mechanism Tape Trans port Mechanism Typ.
Manufacture

Sony

Datasheet
Download CFD-G770CP Datasheet


Sony CFD-G770CP

CFD-G770CP; e CFD-G505/G555CP/G555CPK KSM-213CDP/C2 NP KSS-213C HCD-EC50 H21SB-C05 SPECIFI CATIONS AUDIO POWER SPECIFICATIONS (US) POWER OUTPUT AND TOTAL HARMONIC DISTOR TION With 3.2-ohm loads, both channels driven from 1 000 - 10 000 Hz; rated 3 W per channel-minimum RMS power, with n o more than 10 % total harmonic distort ion in AC operation. Woofer with 4-ohm loads, driven from.


Sony CFD-G770CP

50 - 150 Hz; rated 6 W minimum RMS powe r, with no more than 10 % total harmoni c distortion in AC operation. Other spe cifications CD player section System Co mpact disc digital audio system Laser d iode properties Emission duration: Cont inuous Laser output: Less than 44.6 µW (Th is output is the value measured at a distance of about 200 mm from the ob jective lens surfac.


Sony CFD-G770CP

e on the optical pick-up block with 7 mm aperture.) Number of channels 2 Freque ncy response 20 - 20 000 Hz +1/–2 dB Wow and fl utter Below measurable limit • Abbreviation AUS : Australian mode l CND : Canadian model E41 : AC 230V ar ea in E model E92 MX SP Radio section F requency range FM: 87.5 - 108 MHz AM: 5 30 - 1 710 kHz (G700CP: US/G770CPK: CND , MX, E92) AM: 531 - 1.

Part

CFD-G770CP

Description

CD RADIO CASSETTE-CORDER



Feature


CFD-G700CP/G770CP/ G770CPK www.DataSheet 4U.com SERVICE MANUAL Ver. 1.0 2007.03 US Model CFD-G700CP Canadian Model C FD-G770CPK E Model CFD-G770CP/G770CPK Australian Model CFD-G770CPK Photo : CFD-G770CPK Model Name Using Similar M echanism CD Section TAPE Section CD Mec hanism Type Optical Pick-up Type Model Name Using Similar Mechanism Tape Trans port Mechanism Typ.
Manufacture

Sony

Datasheet
Download CFD-G770CP Datasheet




 CFD-G770CP
SERVICE MANUAL
Ver. 1.0 2007.03
CFD-G700CP/G770CP/
G770CPKwww.DataSheet4U.com
US Model
CFD-G700CP
Canadian Model
CFD-G770CPK
E Model
CFD-G770CP/G770CPK
Australian Model
CFD-G770CPK
Photo : CFD-G770CPK
CD
Section
TAPE
Section
Model Name Using Similar Mechanism
CD Mechanism Type
Optical Pick-up Type
Model Name Using Similar Mechanism
Tape Transport Mechanism Type
CFD-G505/G555CP/G555CPK
KSM-213CDP/C2NP
KSS-213C
HCD-EC50
H21SB-C05
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS (US)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 3.2-ohm loads, both channels driven from
1 000 - 10 000 Hz; rated 3 W per channel-minimum
RMS power, with no more than 10 % total harmonic
distortion in AC operation.
Woofer with 4-ohm loads, driven from 50 - 150
Hz; rated 6 W minimum RMS power, with no more
than 10 % total harmonic distortion in AC
operation.
Other specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 µW
(Th is output is the value measured at a distance
of about 200 mm from the objective lens surface
on the optical pick-up block with 7 mm
aperture.)
Number of channels
2
Frequency response
20 - 20 000 Hz +1/–2 dB
Wow and fl utter
Below measurable limit
Radio section
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1 710 kHz
(G700CP: US/G770CPK: CND, MX, E92)
AM: 531 - 1 611 kHz (G770CPK: AUS)
AM: 531 - 1 611 kHz (9 kHz step)(G770CP)
AM: 530 - 1 610 kHz (10 kHz step)(G770CP)
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 150 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 70 - 13 000 Hz
General
Speaker
Full range: 10 cm (4 in.) dia., 3.2 ,
cone type (2)
Woofer: 13 cm (5 1/8 in.) dia., 4 ,
cone type (1)
Tweeter: 2 cm (13/16 in.) dia. (2)
Input
Built-in audio cable with stereo-mini plug:
Minimum input level 245 mV
AUDIO IN Jack (stereo minijack):
Minimum input level 245 mV
MIC MIX (microphone) jack (monaural minijack):
Sensitivity 2.5 mV, for low impedance
microphone
Minimum input level 2.5 mV (G770CPK)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 impedance headphones
Power output
4 W + 4 W (at 3.2 , 10% harmonic distortion)
Woofer:
12 W (at 4 , 10% harmonic distortion)
Power requirements
For CD radio cassette-corder:
120 V AC, 60 Hz
(G700CP: US/G770CPK: CND, MX, E92)
230 - 240 V AC, 50 Hz (G700CP: SP)
230 V AC, 50 Hz
(G700CP: E41/G770CPK: AUS)
12 V DC, 8 R20 (size D) batteries
For remote control:
3 V DC, 2 R6 (size AA) batteries
Power consumption
AC 28 W
— Continued on next page —
• Abbreviation
AUS : Australian model
E92 : AC 120V area in E model
CND : Canadian model
MX : Mexican model
E41 : AC 230V area in E model SP : Singapore model
CD RADIO CASSETTE-CORDER
9-887-620-01
2007C16-1
© 2007.03
Sony Corporation
Personal Audio Division
Published by Sony Techno Create Corporation




 CFD-G770CP
CFD-G700CP/G770CP/G770CPK
Battery life
For CD radio cassette-corder:
FM recording
Sony R20P: approx. 6 h
Sony alkaline LR20: approx. 18 h
Tape playback
Sony R20P: approx. 1.5 h
Sony alkaline LR20: approx. 6 h
CD playback
Sony R20P: approx. 1 h
Sony alkaline LR20: approx. 4 h
Dimensions
Approx. 551 × 247 × 370 mm (w/h/d)
(21 3/4 × 9 3/4 × 14 5/8 inches) (incl. projecting parts)
Mass
Approx. 8.4 kg (18 lb. 9 oz) (incl. batteries)
Supplied accessories
AC power cord (1)
Remote control (1)
Design and specifications are subject to change without
notice.
www.DataSheet4U.com
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of soldering iron around 270˚C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
2




 CFD-G770CP
CFD-G700CP/G770CP/G770CPK
www.DataSheet4U.com
TABLE OF CONTENTS
1. SERVICING NOTES ............................................... 4 6. ELECTRICAL ADJUSTMENTS .......................... 23
2. GENERAL ................................................................... 5
3. DISASSEMBLY
3-1. Disassembly Flow ........................................................... 11
3-2. Cabinet (Upper) (1) Section ............................................ 12
3-3. Cabinet (Upper) (2) Section ............................................ 12
3-4. Cabinet (Front) Section ................................................... 13
3-5. LCD Board, AUDIO IN Board, HEADPHONE Board,
POWER KEY Board, MICROPHONE Board
(CFD-G770CPK), VOLUME KEY Board ...................... 13
3-6. Front Panel ...................................................................... 14
3-7. LED Board ...................................................................... 14
3-8. Speaker (13cm) ................................................................ 15
3-9. Speaker (10cm) ................................................................ 15
3-10. POWER Board, BATTERY Board,
D-LIGHT Board (CFD-G700CP) ................................... 16
3-11. WOOFER KEY Board, CD KEY Board ......................... 17
3-12. TUNER Board ................................................................. 17
3-13. Tape Mechanism Deck .................................................... 18
3-14. MAIN Board .................................................................... 18
3-15. CD Block Section ............................................................ 19
3-16. Optical Pick-up (KSM-213CDP/C2NP) ......................... 19
3-17. TC Board ......................................................................... 20
3-18. Main Belt, Sub Belt ......................................................... 20
4. TEST MODE ............................................................... 21
7. DIAGRAMS
7-1. Block Diagram – TUNER/CD Section – ....................... 28
7-2. Block Diagram – MAIN Section – ................................. 29
7-3. Printed Wiring Board – BD90 Board – .......................... 30
7-4. Schematic Diagram – BD90 Board – ............................. 31
7-5. Printed Wiring Board – TUNER Board – ....................... 32
7-6. Schematic Diagram – TUNER Board – ......................... 33
7-7. Printed Wiring Board – TC Board – ............................... 34
7-8. Schematic Diagram – TC Board – ................................. 35
7-9. Printed Wiring Board – MAIN Board – ......................... 36
7-10. Printed Wiring Boards – AUDIO Section – .................... 37
7-11. Printed Wiring Boards – CONTROL Section – ............. 38
7-12. Schematic Diagram – MAIN (1/3), AUDIO Section – .. 39
7-13. Schematic Diagram – MAIN Section (2/3) – ................. 40
7-14. Schematic Diagram
– MAIN (3/3), CONTROL Section – .............................. 41
7-15. Printed Wiring Boards – POWER Section – .................. 42
7-16. Schematic Diagram – POWER Section – ...................... 43
8. EXPLODED VIEWS
8-1. Overall Section ................................................................ 51
8-2. Cabinet (Front) Section ................................................... 52
8-3. Cabinet (Rear) Section .................................................... 53
8-4. Cabinet (Upper) Section-1 ............................................... 54
8-5. Cabinet (Upper) Section-2 ............................................... 55
8-6. Tape Mechanism Deck Section ....................................... 56
5. MECHANICAL ADJUSTMENTS ......................... 23 9. ELECTRICAL PARTS LIST .................................. 57
3



Recommended third-party CFD-G770CP Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)