MLC10-xxxM-RC

RoHS MLC10 0.079±0.008 (2.01±0.20) Multilayer Chip Inductors 0.035±0.008 (0.89±0.20) * 0.049±0.008 (1.25±0.20) 0.020±0.012 (0.51±0.30) Dimensions: Inches (mm) 0.049±0.008 (1.25±0.20) 0.039 (0.99) 0.047 (1.19) 0.045 (1.14) www.DataSheet4U.com Electrical Q vs. Frequency Characteristics: Measured on Impedance Analyzer HPA4195A. I n d u c t a n c e v s . Te m p e r a t u r e Characteristics: Measured on LCR Meter HP4285A. Impedance vs. Frequency Characteristics: Measured on Impedance Analyzer HPA4195A. Inductance Vs. DC Current Characteristics: Measured on LCR Meter HPA4285A. Tolerance: For 20% use M, 10% use K, and 5% use J as part number suffix. Mechanical Solderability: 90% terminal coverage. Preheat: 120 ± 20° C for 60 sec. Solder: H63A. Solder Temp.: 230 ± 5° C. Flux: rosin. Dip time: 4 ± 1 sec. Environmental Thermal Shock: Inductance shall be within ±5% of initial value. Q shall be within ± 30% of initial value within temp. range of -40 ° C to + 85° C for 30 min. each for > 100 cycles. Humidity Resistance: Same results as above. Temp. 4° C. Humidity: 95% RH. Time: 1000 hrs. High Temp Resistance: Same results as above. Temp: 85 ° C. Time: 1000 hrs. Low Temp Resistance: Same results as above. Temp: -45 ° C. Time: 1000 hrs. Operating Temp.: -25 ° C to +85 ° C. Storage Temp.: -40 ° C to +85 ° C. Physical Packaging: .022µH - 2.2µH, 4000 pieces per reel. 2.7µH - 27µH 3000 pieces per 7 inch reel. Allied Part Number Inductance Tolerance (%) (µ h) Q Min. Test Freq. (MHz) ...