MX29SL800CT

MX29SL800C T/B FEATURES 8M-BIT [1Mx8/512K x16] CMOS SINGLE VOLTAGE 1.8V ONLY FLASH MEMORY Ready/Busy# pin (RY/BY#) - Provides a hardware method of detecting program or erase operation completion Hardware reset pin (RESET#) - Hardware method to reset the device to reading array data Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors CFI (Common Flash Interface) compliant - Flash device parameters stored on the device and provide the host system to access 100,000 minimum erase/program cycles Latch-up protected to 100mA from -1V to VCC+1V Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector Package type: - 48-pin TSOP - 48-ball CSP - All Pb-free devices are RoHS Compliant Compatibility with JEDEC standard - Pinout and software compatible with single-power supply Flash 10 years data retention Extended single - supply voltage range 1.65V to 2.2V 1,048,576 x 8/524,288 x 16 switchable Single power supply operation - 1.8V only operation for read, erase and program operation Fast access time: 90ns Low power consumption - 12mA maximum active current (10MHz) - 1uA typical standby current www.DataSheet4U.com Command register architecture - Byte/word Programming (12us/18us typical) - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x15) Auto Erase (chip & sector) and Auto...