DS75LV

DS75LV Digital Thermometer and Thermostat www.maxim-ic.com DESCRIPTION This low-voltage (1.7V to 3.7V) digital thermometer and thermostat provides 9-, 10-, 11-, or 12-bit digital temperature readings over a -55°C to +125°C range with ±2°C accuracy over a -25°C to +100°C range. At power-up, the DS75LV defaults to 9-bit resolution for software compatibility with the LM75. Communication with the DS75LV is achieved through a simple 2-wire serial interface. Three address pins allow up to eight www.DataSheet4U.com DS75LV devices to operate on the same 2-wire bus, which greatly simplifies distributed temperaturesensing applications. The DS75LV thermostat has a dedicated open-drain output (O.S.) and programmable fault tolerance, which allows the user to define the number of consecutive error conditions that must occur before O.S is activated. There are two thermostatic operating modes that control thermostat operation based on user-defined trip-points (TOS and THYST). A block diagram of the DS75LV is shown in Figure 1 and detailed pin descriptions are given in Table 2. FEATURES § § § § § § § § § § § § § Operating Range from 1.7V to 3.7V Temperature Measurements Require No External Components Measures Temperatures from -55°C to +125°C (-67°F to +257°F) ±2°C Accuracy Over a -25°C to +100°C Range Thermometer Resolution is UserConfigurable from 9 (Default) to 12 Bits (0.5°C to 0.0625°C Resolution) 9-Bit Conversion Time is 25ms (Max) Thermostatic Settings are User-Definable Data Read/Wr...