Document
IRS2336(S)(J)PBF is not recommended for new designs. For new designs we recommend IR2136(S)(J)PBF or 6EDL04I06NT
April 26, 2011
IRS2336(D) IRS23364D
HIGH VOLTAGE 3 PHASE GATE DRIVER IC
Features
• Drives up to six IGBT/MOSFET power devices • Gate drive supplies up to 20 V per channel • Integrated bootstrap functionality (IRS2336(4)D) • Over-current protection • Over-temperature shutdown input • Advanced input filter • Integrated deadtime protection • Shoot-through (cross-conduction) protection • Undervoltage lockout for VCC & VBS • Enable/disable input and fault reporting • Adjustable fault clear timing • Separate logic and power grounds • 3.3 V input logic compatible • Tolerant to negative transient voltage • Designed for use with bootstrap power supplies • Matched propagation delays for all channels • -40°C to 125°C operating range • RoHS compliant • Lead-Free
Product Summary
Topology
VOFFSET VOUT
IRS2336(D) IRS23364D
Io+ & I o- (typical) tON & tOFF (typical) Deadtime (typical)
Package Options
3 Phase ≤ 600 V 10 V – 20 V 11.5 V – 20 V 200 mA & 350 mA 530 ns & 530 ns 275 ns
28-Lead PDIP
28-Lead SOIC Wide Body
Typical Applications
• Appliance motor drives • Servo drives • Micro inverter drives • General purpose three phase inverters
Typical Connection Diagram
48-Lead MLPQ7X7 (without 14 leads)
44-Lead PLCC (without 12 leads)
www.irf.com
© 2009 International Rectifier
IRS2336(S)(J)PBF is not recommended for new designs. For new designs we recommend IR2136(S)(J)PBF or 6EDL04I06NT
IRS2336x(D) Family
Table of Contents
Description Feature Comparison Simplified Block Diagram Typical Application Diagram Qualification Information Absolute Maximum Ratings Recommended Operating Conditions Static Electrical Characteristics Dynamic Electrical Characteristics Functional Block Diagram Input/Output Pin Equivalent Circuit Diagram Lead Definitions Lead Assignments Application Information and Additional Details Parameter Temperature Trends Package Details Tape and Reel Details Part Marking Information Ordering Information
Page
3 3 4 4 5 6 7 8-9 10 11-12 13-14 15-16 17 18-35 36-39 40-43 44-46 47 48
www.irf.com
© 2009 International Rectifier 2
IRS2336(S)(J)PBF is not recommended for new designs. For new designs we recommend IR2136(S)(J)PBF or 6EDL04I06NT
IRS2336x(D) Family
Description
The IRS2336xD are high voltage, high speed, power MOSFET and IGBT gate drivers with three high-side and three low-side referenced output channels for 3-phase applications. This IC is designed to be used with low-cost bootstrap power supplies; the bootstrap diode functionality has been integrated into this device to reduce the component count and the PCB size. Proprietary HVIC and latch immune CMOS technologies have been implemented in a rugged monolithic structure. The floating logic input is compatible with standard CMOS or LSTTL outputs (down to 3.3 V logic). A current trip function which terminates all six outputs can be derived from an external current sense resistor. Enable functionality is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that a fault (e.g., over-current, over-temperature, or undervoltage shutdown event) has occurred. Fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high-pulse current buffer stage designed for minimum driver cross-conduction. Shoot-through protection circuitry and a minimum deadtime circuitry have been integrated into this IC. Propagation delays are matched to simplify the HVIC’s use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high-side configuration, which operate up to 600 V.
Feature Comparison: IRS2336xD Family
Part Number
Input Logic
UVLO
IRS2336(D)
HIN/N, LIN/N
8.9 V/ 8.2 V
IRS23364D
HIN, LIN
11.1 V/ 10.9 V
VIT,TH 0.46 V 0.46 V
tON, tOFF 530 ns, 530 ns 530 ns, 530 ns
VOUT 10 V – 20 V 11.5 V – 20 V
www.irf.com
© 2009 International Rectifier 3
IRS2336(S)(J)PBF is not recommended for new designs. For new designs we recommend IR2136(S)(J)PBF or 6EDL04I06NT
IRS2336x(D) Family
Simplified Block Diagram
Typical Application Diagram
+
DC Bus ≤ 600 V
Input Voltage
-
IRS2336xD
VCC
Control Inputs, EN, & FAULT
www.irf.com 4
To Load
© 2009 International Rectifier
IRS2336(S)(J)PBF is not recommended for new designs. For new designs we recommend IR2136(S)(J)PBF or 6EDL04I06NT
IRS2336x(D) Family
Qualification Information†
Industrial††
Qualification Level
Comments: This family of ICs has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level.
SOIC28W MLPQ7X7
MSL3†††, 260°C (per IPC/JEDEC J-STD-020)
Moisture Sensitivity Level
PLCC44
MSL3†††, 245°C (per IPC/JEDEC J-STD-020)
ESD
IC.