This component is RoHS compliant
OPI 2000 High Speed Opto Isolator
Pb
www.DataSheet4U.com
The OPI 2000 High Speed Optically Coupled Isolator consists of a High Speed Infrared emitter coupled to a silicon photo I.C. The unit is designed for applications requiring high voltage isolation between input & output meeting ATEX requirements. • Surface Mount configuration available . • 10KV isolation • High Speed 2Mb/sec. • Low Propagation Delay
ALSO AVAILABLE IN THIS SERIES:OPI2000M ATEX CERTIFIED SURFACE MOUNT OPI2000MK INTEGRAL ELECTROMAGNETIC EARTHED SCREEN OVER SENSOR FOR HIGH COMMON MODE REJECTION
MECHANICAL DATA
+0.2 21.65 0 6.65
9.25
3.0 EMITTER 0.4 18.05 +0.2 0 SENSOR 0.5
+0.2 0
2.54 1.91 1.91
An
Gnd TOP VIEW Vout Vcc
1.91 1.91
2.54
K
BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail:
[email protected]
29.11.07 ISS C
OPI 2000
ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted)
www.DataSheet4U.com
INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION OUTPUT IC MAX SUPPLY VOLTAGE POWER DISSIPATION OPERATING TEMP STORAGE TEMP INPUT-TO-OUTPUT ISOLATION VOLTAGE LEAD SOLDERING TEMP 2mm from body 5 secs max
100mA 5 Volts 150mW (ii)
7 Volts 165mW -40OC TO +70OC -40OC TO +85OC + 10KV DC (i) 260OC
i) ii)
Measured with the input leads and output leads shorted together for one min. Thermal resistance 450 K/W
Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of the need to increase the diode current to trigger the device over long periods at high temperatures & currents.
CIRCUIT
Vgen + + RL C GND Vout Vcc
Rf
RL =560 ohm
C=0.01uF
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail:
[email protected]
29.11.07 ISS C
BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX
OPI 2000
www.DataSheet4U.com
OPTO ELECTRONIC DATA (TA = 25OC)
PARAMETER INPUT DIODE Forward Voltage Reverse Voltage OUTPUT IC ( Vcc=4.75 to 5.25 ) High level Output Current Low Level Output Voltage SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
VF VR
5.0
1.35 -
1.6 -
V V
If=100mA tp=20mS Ir = 100uA
ICH
-
100 0.6
uA V
Ic = 10 uA
VOL
IF=10mA IOL=2.6mA
High Level Supply Current Low Level Supply Current
ICCH ICCL
15 18
mA mA
IF=0 IF=10mA
COUPLED(Vcc=5volts)
Propagation Delay to Low Output Propagation Delay to High Output
tPLH tPHL
800 800
nSecs nSecs
RL=560ohms C=0.01uF ditto
OPTO ELECTRONIC SOLUTIONS
BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail:
[email protected]
29.11.07 ISS C
.