QUAD CHANNEL HIGH SIDE DRIVER
www.DataSheet4U.com
VNQ600AP-E
QUAD CHANNEL HIGH SIDE DRIVER
Table 1. General Features
TYPE VNQ600AP-E
(*) Per each cha...
Description
www.DataSheet4U.com
VNQ600AP-E
QUAD CHANNEL HIGH SIDE DRIVER
Table 1. General Features
TYPE VNQ600AP-E
(*) Per each channel
Figure 1. Package
Ilim 22A VCC 36 V
RDS(on) (*) 35mΩ
DC SHORT CIRCUIT CURRENT: 22A s CMOS COMPATIBLE INPUTS s PROPORTIONAL LOAD CURRENT SENSE s UNDERVOLTAGE & OVERVOLTAGE SHUT-DOWN s OVERVOLTAGE CLAMP s THERMAL SHUT-DOWN s CURRENT LIMITATION s VERY LOW STAND-BY POWER DISSIPATION s PROTECTION AGAINST: LOSS OF GROUND & LOSS OF VCC s REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE
s
SO-28 (DOUBLE ISLAND)
DESCRIPTION The VNQ600AP-E is a quad HSD formed by assembling two VND600-E chips in the same SO28 package. The VND600-E is a monolithic device designed in| STMicroelectronics VIPower M0-3 Technology.
The VNQ600AP-E is intended for driving any type of multiple loads with one side connected to ground. This device has four independent channels and four analog sense outputs which deliver currents proportional to the outputs currents. Active current limitation combined with thermal shut-down and automatic restart protect the device against overload. Device automatically turns off in case of ground pin disconnection.
Table 2. Order Codes
Package SO-28
Note: (**) See application schematic at page 11.
Tube VNQ600AP-E
Tape and Reel VNQ600APTR-E
Rev. 1 October 2004 1/20
VNQ600AP-E
Figure 2. Block Diagram
www.DataSheet4U.com
VCC 1,2
OVERVOLTAGE UNDERVOLTAGE DEMAG 1
DRIVER 1
OUTPUT 1 ILIM1
INPUT 1 LOGIC INPUT 2 GN...
Similar Datasheet