Document
FMOPC5S SERIES
5.0 Vdc Clock Oscillators
Miniature, Low Profile 5.0 Vdc Supply Voltage www.DataSheet4U.com PECL 10 to 250 MHz
CERAMIC SMD 5x7
SPECIFICATIONS
05|issue1|101404
Parameter Frequency Range Overall Frequency Tolerance Operating Temperature Range Storage Temperature Supply Voltage (Vdd) Supply Current (Icc) Phase Jitter Symmetry (Duty Cycle) Output “1” Level (Vcc) Output “0” Level (Vcc) Rise and Fall Time Start Time Output Load Pin 1 Options (See Spec. Option T below)
Specification 10.000 to 250.000 MHz ±20 ppm to ±100 ppm (Inclusive of Operating Temp., Supply Voltage, & Load) 0 to +70°C Std., -40 to +85°C Avail. -55 to +125°C +5.0 Vdc (±0.3 Vdc) 90 mA max. at 250 MHz 3 pS RMS max. | Condition: 12 kHz to 20 MHz 40/60% Std., 45/55% Avail. (See Spec. Option S) Vcc - 1.025 V min. Vcc - 1.620 V min. 0.55 ns max. (20 to 80%) 10 ms max. < 5 ms typical 50 ohms max. (Vcc - 2.0V) No Connect (Std.) Tri-State (option T)
VIH: 2.2 V or Open Enables Output VIL: 0.8 V Disables Output Output Disable/Enable Time: 100 nS max.
CERAMIC SMD
6 5 4 0.197 ±0.008 (5.0 ±0.2) 1 2 3 0.276 ±0.008 (7.0 ±0.2) 0.75 (1.90) MAX
Side View
0.055 (1.40) TYP 1 2 3 0.102 (2.60) TYP 5 0.200 (5.08) TYP 4
0.047 (1.10) TYP
6
Aging @ 25°C
±5ppm max first year
All specifications subject to change without notice.
Bottom View
0.94 1.60 1.50 2.40 3.90
PIN FUNCTION TABLE
Pin 1 2 3 4 5 6 Function Tri-state Enable/Disable NC or Tri-State Ground (Case) Output Diff. Output Supply Voltage (Vdd)
5.08
Soldering Position
NOTE: Waveforms & Test Circuits on pages 48, 49
Standard Specifications for product indicated in color
Dimensions: Inches (mm)
PART NUMBERING SYSTEM
Product Family PECL 5.0 Vdc Clock Osc. Ceramic SMD
MARKING: MARKING: See See Page Page 52, 57,Format Format M A
Options TR - Tape and Reel PD - Parameter Data CM - Custom Mark BLANK - None Req’d.
FMOPC5S 00 A S / T - XX.XXXXXXM - CM
Overall Frequency Tol. 20 - ± 20 ppm 25 - ± 25 ppm 50 - ± 50 ppm 00 - ± 100 ppm nn - ± Custom Value Frequency (MHz) Temp. Range A 0 to 70 °C B -20 to 70 °C C -40 to 85 °C D -10 to 50 °C E -10 to 60 °C F -30 to 60 °C J 0 to 50 °C X - Custom Specification Options S - Tight Symmetry (45/55%) Duty Cycle T - Tri-State BLANK - None Required (Std.)
FREQUENCY MANAGEMENT | INTERNATIONAL
15302 Bolsa Chica Street Huntington Beach, CA 92649 ph (714) 373-8100 | fx (714) 373-8700
1-800-800-XTAL [9825] www.fmi-inc.com
36
.