Document
Ordering number : ENN7293
SBE809
www.DataSheet4U.com
Schottky Barrier Diode
SBE809
30V, 70mA Rectifier
Applications
• •
Package Dimensions
unit : mm 1294
[SBE809]
2.9 0.15
General rectification. High frequency rectification (switching regulators, converters, and choppers).
• • •
•
0.2
Low forward voltage (VF max=0.55V). Fast reverse recovery time (trr max=10ns). Composite type with 2 diodes contained in the CPH package currently in use, improving the mounting efficiency greatly. The chips incorporated are both equivalent to the SB007-03CP.
0.6
Features
5
4
3
1
0.95
2
0.4
0.6
1.6
2.8
0.05
1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode SANYO : CPH5
Specifications
Absolute Maximum Ratings at Ta=25°C (Value per element)
Parameter Repetitive Peak Reverse Voltage Non-repetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Symbol VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle Conditions
0.4
0.7
0.9
Ratings 30 35 70 2 --55 to +125 --55 to +125
0.2
Unit V V mA A °C °C
Electrical Characteristics at Ta=25°C (Value per element)
Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance Symbol VR VF IR C trr Rth(j-a) IR=20µA IF=70mA VR=15V VR=10V, f=1MHz IF=IR=10mA, see specified Test Circuit. Conditions Ratings min 30 0.55 5.0 3.0 10 300 typ max Unit V V µA pF ns °C / W
Marking : SH
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O1002 TS IM TA-3615 No.7293-1/3
SBE809
Electrical Connection
5 4 3
www.DataSheet4U.com
trr Test Circuit
Duty≤10%
1
2
(Top view)
5V
10mA
1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode
10mA
10µs
50Ω
100Ω
10Ω
trr
2 100 7 5 3 2
IF -- VF
1000 5 2 100 5 2 10 5 2 1.0 5 2 0.1 5 2 0.01
IR -- VR
Ta=125°C
Forward Current, IF -- mA
Reverse Current, IR -- µA
100°C
75°C
25° C
--25 °C
10 7 5 3 2 1.0 7 5 3 0 0.1
Ta= 1
75
°C
25 ° C
50°C
25°C
0.2
0.3
0.4
0.5
0.6
0.7
0
5
10
15
20
25
30
1.0mA
35 ITR10742
Forward Voltage, VF -- V
2
ITR10741 2.8
C -- VR
Reverse Voltage, VR -- V
IS -- t
Current waveform 50Hz sine wave IS 20ms t
f=1MHz
Surge Forward Current, IS(Peak) -- A
7 2 3 5 7 2 3 5
Interterminal Capacitance, C -- pF
10 7 5 3 2
2.4
2.0
1.6
1.2
1.0 7 5 3 5
0.8
0.4 0
1.0
10
7 0.01
2
3
5
7 0.1
2
3
5
7 1.0
2
3
Reverse Voltage, VR -- V
ITR10743
Time, t -- s
ITR10744
No.7293-2/3
SBE809
www.DataSheet4U.com
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any.