Power Supplies DC-AC Inverters
www.DataSheet4U.com
Power Supplies
DC to AC Inverters For 1 Bulb, 5W Diming
This DC to AC inverter unit is designed for...
Description
www.DataSheet4U.com
Power Supplies
DC to AC Inverters For 1 Bulb, 5W Diming
This DC to AC inverter unit is designed for dimming-type cold cathode lamps. This inverter can be used for lighting a wide range of single cold cathode fluorescent lamps. FEATURES Use of output current control avoids effects resulting from input voltage, load, and distributed capacitance variation. This inverter unit is appropriate for use with 6 to 13 inch LCDs since the typical open circuit voltage(initial lamp ignition voltage) is 1.8kVrms. Safe design that includes a built-in overcurrent protection element. Insulation is simplified due to flat backside surface of board. Excellent inverter for ignition of U-shaped cold cathode fluorescent lamps. SHAPES AND DIMENSIONS
95.5max.
CXA Series CXA-L0612A-VJL
TEMPERATURE AND HUMIDITY RANGES
Temperature range Humidity range Operating Storage 0 to +60°C –20 to +85°C 95(%)RH max. [Maximum wet-bulb temperature:38°C]
(4.5)
(4)
82 ± 0.2
12.8 ± 0.2
20max.
1
CN2
1 CN1 ∗2 ∗1 2-ø2.2 ± 0.1
∗3
∗ 1 Substrate (PWB: Printed wiring board): Inflammable material UL94V-0 (FR-4 or CEM-3) t=1mm ∗ 2 CN1: Molex Japan Co., Ltd. 53261-0510 ∗ 3 CN2: Japan Solderless Terminal Co., Ltd. SM02 (8.0) B-BHS-1
Weight: 14.5g typ. Dimensions in mm
TERMINAL NUMBERS AND FUNCTIONS CN1
Terminal No. CN1-1 Vin CN1-2 GND CN1-3 Vrmt CN1-4 CN1-5 Vbr NC Functions Input voltage Edc:9.6 to 15V 0V Reote voltage Edc:0/5 to 15V[5 to 15V operating] Brightness dimmer voltage Edc:0 to 4V...
Similar Datasheet