EMI filter including ESD protection
www.DataSheet4U.com
EMIF03-SIM03F3
3-line IPAD™, EMI filter including ESD protection
Features
■ ■ ■ ■ ■ ■
EMI symmetri...
Description
www.DataSheet4U.com
EMIF03-SIM03F3
3-line IPAD™, EMI filter including ESD protection
Features
■ ■ ■ ■ ■ ■
EMI symmetrical (I/O) low-pass filter High efficiency in EMI/ESD protection Lead-free package Very thin package High reliability offered by monolithic integration High reduction of parasitic elements through integration and wafer level packaging Figure 1.
Lead-free Flip-Chip package (8 bumps)
Complies with the following standards
■
Pin configuration (bump side)
3
RST in
2
RST ext
1 A
IEC 61000-4-2 level 4 – ± 15 kV (air discharge) – ± 8 kV (contact discharge) IEC 61000-4-2 level 1 – ± 2 kV (air discharge) – ± 2 kV (contact discharge) ETSI 102.221 (configuration FIDI = 97)
■
CLK in
GND
CLK ext
B
■
Data in
Vcc
Data ext
C
Applications
Where EMI filtering in ESD sensitive equipment is required:
■ ■
Figure 2.
C2
Configuration
Mobile phones and communication systems Computers, printers and MCU Boards
A3 RST - in B3 CLK - in C3 Data - in
100 Ω R1 47 Ω R2 100 Ω R3
A2 RST - ext B1 CLK - ext C1 Data - ext
Description
The EMIF03-SIM03F3 chip is a very low capacitance EMI filter designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interference. This filter includes ESD protection circuitry, which prevents damage to the protected device when subjected to ESD surges up to 15 kV.
B2 GND
TM: IPAD is a trademark of STMicroelectronics.
May 2010
Doc ID 16798 Rev 1
1/8
www.st.com 8
www.DataSheet4U.com
Electrical characteristics
EMIF03-...
Similar Datasheet