NCP3011

NCP3011, NCV3011 Synchronous PWM Controller The NCP3011 is a PWM device designed to operate from a wide input range and is capable of producing an output voltage as low as 0.8 V. The NCP3011 provides integrated gate drivers and an internally set 400 kHz oscillator. The NCP3011 has an externally compensated transconductance error amplifier with an internally fixed soft−start. The NCP3011 incorporates output voltage monitoring with a Power Good pin to indicate that the system is in regulation. The dual function SYNC pin synchronizes the device to a higher frequency (Slave Mode) or outputs a 180° out−of−phase clock signal to drive another NCP3011 (Master Mode). Protection features include lossless current limit and short circuit protection, output overvoltage and undervoltage protection, and input undervoltage lockout. The NCP3011 is available in a 14−pin TSSOP package. Features Input Voltage Range from 4.7 V to 28 V 400 kHz Operation 0.8 V $1.0% Reference Voltage Buffered External +1.25 V Reference Current Limit and Short Circuit Protection Power Good Enable/Disable Pin Input Undervoltage Lockout External Synchronization Output Overvoltage and Undervoltage Protection NCV Prefix for Automotive and Other Applications Requiring Site and Change Controls This is a Pb−Free Device Typical Applications Set Top Box Power Modules ASIC / DSP Power Supply VIN CIN EN VCC BST HSDR CBST PG VSW VREF SYNC LSDR R ISET GND Q1 LO Q2 RFB1 RFB2 VOUT CO RREF ...