Ultra-Low Cost - Rail To Rail I/O for CMOS Amplifier
www.DataSheet4U.com
FAN4931 — Ultra-Low Cost, Rail-to-Rail I/O, CMOS Amplifier
November 2009
FAN4931 Ultra-Low Cost, ...
Description
www.DataSheet4U.com
FAN4931 — Ultra-Low Cost, Rail-to-Rail I/O, CMOS Amplifier
November 2009
FAN4931 Ultra-Low Cost, Rail-to-Rail I/O, CMOS Amplifier
Features
200µA Supply Current per Amplifier 3.7MHz Bandwidth Output Swing to within 10mV of Either Rail Input Voltage Range Exceeds the Rails 3V/µs Slew Rate 25nV/√Hz Input Voltage Noise FAN4931 Competes with LMV931; Available in SC70-5 Package Fully Specified at +2.7V and +5V Supplies
Description
FAN4931 is an ultra-low cost voltage feedback amplifier with CMOS inputs that consumes only 200µA of supply current, while providing ±33mA of output short-circuit current. This amplifier is designed to operate from 2.5V to 5V supplies. The common-mode voltage range extends beyond the negative and positive rails. The FAN4931 is designed on a CMOS process and provides 3.7MHz of bandwidth and 3V/μs of slew rate at a supply voltage of 5V. The combination of low power, rail-to-rail performance, low-voltage operation, and tiny package options make this amplifier well suited for use in general-purpose and battery-powered applications.
Applications
Portable / Battery-Powered Applications PCMCIA, USB Mobile Communications, Cellular Phones, Pagers Notebooks and PDAs Sensor Interface A/D Buffer Active Filters Signal Conditioning Portable Test Instruments Figure 1. Frequency vs. Gain
Ordering Information
Part Number
FAN4931IP5X
Operating Temperature Range
-40 to +85°C
Package
5-Lead SC70 Package
Eco Statu...
Similar Datasheet