NXS0102

www.DataSheet4U.com NXS0102 Dual supply translating transceiver; open drain; auto direction sensing Rev. 01 — 2 June 2010 Product data sheet 1. General description The NXS0102 is a 2-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two data input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. 2. Features and benefits „ Wide supply voltage range: ‹ VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V „ Maximum data rates: ‹ Push-pull: 50 Mbps „ IOFF circuitry provides partial Power-down mode operation „ Inputs accept voltages up to 5.5 V „ ESD protection: ‹ HBM JESD22-A114E Class 2 exceeds 2500 V for A port ‹ HBM JESD22-A114E Class 3B exceeds 8000 V for B port ‹ MM JESD22-A115-A exceeds 200 V ‹ CDM JESD22-C101E exceeds 1500 V „ Latch-up performance excee...