PIC18F13K22

PIC18(L)F1XK22 20-Pin Flash Microcontrollers with XLP Technology High-Performance RISC CPU C Compiler Optimized Architecture: - Optional extended instruction set designed to optimize re-entrant code 256 bytes Data EEPROM Up to 16 Kbytes Linear Program Memory Addressing Up to 512 bytes Linear Data Memory Addressing Up to 16 MIPS Operation 16-bit Wide Instructions, 8-bit Wide Data Path Priority Levels for Interrupts 31-Level, Software Accessible Hardware Stack 8 x 8 Single-Cycle Hardware Multiplier Flexible Oscillator Structure Precision 16 MHz Internal Oscillator Block: - Factory calibrated to ± 1% - Software selectable frequencies range of 31 kHz to 16 MHz - 64 MHz performance available using PLL – no external components required Four Crystal modes up to 64 MHz Two External Clock modes up to 64 MHz 4X Phase Lock Loop (PLL) Secondary Oscillator using Timer1 @ 32 kHz Fail-Safe Clock Monitor - Allows for safe shutdown if peripheral clock stops Two-Speed Oscillator Start-up Special Microcontroller Features 2.3V - 5.5V Operation – PIC18F1XK22 1.8V-3.6V Operation – PIC18LF1XK22 Self-reprogrammable under Software Control Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) Programmable Brown-out Reset (BOR) Extended Watchdog Timer (WDT): - Programmable period from 4 ms to 131s Programmable Code Protection In-Circuit Serial Programming™ (ICSP™) via two pins In-Circuit Debug via Two Pins Extreme Low-Power Ma...