DICE/DWF SPECIFICATION RH3080MK Adjustable 0.9A Single Resistor Low Dropout Regulator
PAD FUNCTION
1. 2. 3. 4. 5. IN OUT...
DICE/DWF SPECIFICATION RH3080MK Adjustable 0.9A Single Resistor Low Dropout
Regulator
PAD FUNCTION
1. 2. 3. 4. 5. IN OUT SENSE SET VCONTROL
www.DataSheet4U.com
DIE CROSS REFERENCE
LTC Finished Part Number RH3080MK RH3080MK Order Part Number RH3080MKDICE RH3080MKDWF*
2
1
Please refer to LTC standard product data sheet for other applicable product information. *DWF = DICE in wafer form.
2
1
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.
3
5
4
44mils × 75mils, Backside metal: Alloyed gold layer Backside potential: OUT Tie SENSE to OUT
DESCRIPTION
The RH3080 is a 0.9A low dropout linear
regulator with a unique architecture featuring a precision current source and voltage follower which allows the output to be programmed to any voltage between zero and 36V. Multiple
regulators can be paralleled to increase total output current and spread heat over a system PC board with no need for heat sinking. The pass
transistor collector can be brought out independently of the circuit supply voltage to allow dropout voltage to approach the saturation limit of the pass
transistor. A small 2.2μF capacitor on the output with an ESR of less than 0.5Ω is adequate to insure stability. Applications with large output load transients require a larger output capacitor value to minimize output voltage change. Input circuitry insures output safe operating area ...