1- and 2-Channel PicoGuard AC Signal ESD Protector
CM1214A
1 and 2-Channel AC Signal ESD Protector
Product Description The CM1214A ESD protector is used to protect bipol...
Description
CM1214A
1 and 2-Channel AC Signal ESD Protector
Product Description The CM1214A ESD protector is used to protect bipolar signal lines
against electrostatic discharge (ESD). The CM1214A allows operation in high−speed environments with signals levels up to ±5 V.
The CM1214A comes in two versions:
www.onsemi.com
The CM1214A−01SO is a single channel ESD protector and is
available in a 3−lead SOT23−3 package.
The CM1214A−02MR is a dual channel ESD protector and is
available in an 8−lead MSOP−8 package.
The low sub−1 pF loading capacitance makes the CM1214A−01SO ideal for protecting high−speed interfaces including RF switches and amplifiers.
The CM1214A−02MR is ideal for dual high−speed signal pairs used in Gigabit Ethernet, ADSL, etc. The CM1214A−02MR can also be used for higher transmit voltage applications by connecting the two channels in series.
Features
Single Channel ESD Protection for an AC Signal Up To ±5 V for
0.25 W Transmit Power
Connects Two Channels in Series for Signals Up To ±10 V
(1 W transmit power)
±8 kV ESD Protection Per IEC 61000−4−2 Contact Discharge Sub−1pF Loading Capacitance Minimal Variation with Voltage and Temperature Each I/O Pin Can Withstand Over 1000 ESD Strikes* SOT23−3 and MSOP−8 Packages These Devices are Pb−Free and are RoHS Compliant
Applications
RF Switch and Amplifier Protection RF Modules and RF IC Protection Wireless Handsets and WLAN High−Speed AC Signals for Gbit Ethernet, etc.
SOT23−3 SO SUFFIX CASE 318
...
Similar Datasheet