Two-Channel Proximity and Touch Sensor
www.DataSheet4U.com
19-5310; Rev 0; 7/10
TION KIT EVALUA BLE A IL A AV
Automotive, Two-Channel Proximity and Touch Se...
Description
www.DataSheet4U.com
19-5310; Rev 0; 7/10
TION KIT EVALUA BLE A IL A AV
Automotive, Two-Channel Proximity and Touch Sensor
General Description Features
S Low Average Operating Current (100µA at 14V) S 1.2.fF LSB Capacitance-to-Digital Resolution (5pF
MAX1441
The MAX1441 proximity and touch sensor IC is designed for capacitive proximity sensing in automotive passive remote keyless entry (PRKE) and other applications. This device provides signal processing to support two independent touch/proximity sensor channels. The device features two open-drain output pins with highvoltage capability up to 28V, as well as five digital I/Os to indicate sensing events. During manufacturing, JTAG programming uses four digital I/Os. The device uses grounded electrode capacitive sensing to measure capacitance between one of the two sense pins and the ground. A hand approaching a sense electrode attached to these sense pins causes a change in measured capacitance indicating the presence (touch or proximity) of the object. Activeguard outputs shield the sense electrode from unwanted sources without adding parasitic capacitance. Spread-spectrum techniques in the sensor excitation circuit reduce both electromagnetic emissions and susceptibility to interfering signals. In addition, the sensing excitation frequency is programmable from 100kHz to 500kHz in 10kHz steps to avoid interference. The sensor input signals are converted to a 12-bit digital data and are available to an on-chip microcontr...
Similar Datasheet