SP60001

China Electronics Technology Group Corporation No.26 Research Institute 600MHz Low-loss SAW Filter www.DataSheet4U.com 45MHz Bandwidth Part Number: SP60001 www.sipatsaw.com SIPAT Co., Ltd. Specifications Parameter Center Frequency Insertion Loss(f0±20MHz) 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Variation(f0±20MHz) Absolute Delay Group Delay Variation(f0±20MHz) 100～570MHz Ultimate Rejection 630～650MHz 650～1000MHz Material Temperature coefficient Ambient Temperature Package Size Unit MHz dB MHz MHz MHz dB usec Minimum 40 45 30 30 30 Typical 600 23 46.97 48.5 55.88 1.4 0.64 30 25 30 35 -49.2 25 SMD7.0*5.0 Maximum 24 60 2 150 - nsec dB dB dB KHz/°C °C Notes: 1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Ver. SP60001 2007-05-06 1.0 Page 1/4 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / [email protected] China Electr...