SP80001

China Electronics Technology Group Corporation No.26 Research Institute 800MHz Low-loss SAW Filter www.DataSheet4U.com 53MHz Bandwidth Part Number: SP80001 www.sipatsaw.com SIPAT Co., Ltd. Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Variation(f0±20MHz) Absolute Delay Group Delay Variation(f0±20MHz) 690～770MHz 830～910MHz Ultimate Rejection 1～690MHz 910～1000MHz Unit MHz dB MHz MHz MHz dB usec Minimum 53.3 3 3 35 35 Typical 800 2 36.24 55 134.53 0.1 0.02 8 11 4 48 50 -54.4 25 SMD3.8*3.8 Maximum 5 55 1 20 - nsec dB dB dB dB KHz/°C °C Material Temperature coefficient Ambient Temperature Package Size Notes: 1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Ver. SP80001 2007-04-30 1.0 Page 1/4 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / [email protected] China Electron...