NCP102
Low Dropout Linear Regulator Controller
The NCP102 is a low dropout linear regulator controller for application...
NCP102
Low Dropout Linear
Regulator Controller
The NCP102 is a low dropout linear
regulator controller for applications requiring high-current and ultra low dropout voltages. The use of an external N-Channel MOSFET allows the user to adapt the device to a multitude of applications depending on system requirements for current and dropout voltage.
An extremely accurate 0.8 V (±2%) reference allows the implementation of sub 1 V voltage supplies. The reference is guaranteed over the complete supply and temperature ranges.
Other features of the NCP102 are a dedicated enable input, internally compensated error amplifier and an adjustable soft-start. A minimum drive capability of ±5 mA provides fast transient response. The drive current is internally limited to protect the controller in case of an external MOSFET failure. The NCP102 is packaged in a space saving TSOP-6.
Features
ă4.5 V to 13.5 V Supply Voltage Range ă0.8 V (±2%) Voltage Reference (Temperature and Process) ăProgrammable
Regulator Output Voltage Down to 0.8 V ăDrive Current Capability of > ±5ĂmA ăMLCC and POSCAP Compatible ăProgrammable Soft-Start ăEnable Active High ăSpace Saving TSOP-6 Package ăRoHS Compliant Pb-Free Package
http://onsemi.com
MARKING DIAGRAM
TSOP-6
6
(SOT23-6)
102AYW G
SN SUFFIX
G
1
CASE 318G
1
102 = Device Code A = Assembly Location Y = Year W = Work Week G = Pb-Free Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
EN 1 GND 2
6 VCC 5 DRV
FB 3
4 SOFT-S
...