EOL-K1RCCC0-TK
Device Selection Guide
Part Number EOLLuminous Intensity Iv(mcd) @ IF = 20mA Min. Typ.
Date
Spec. Numbe...
EOL-K1RCCC0-TK
Device Selection Guide
Part Number EOLLuminous Intensity Iv(mcd) @ IF = 20mA Min. Typ.
Date
Spec. Number
Ver. A-00
2006/4/4 L-461-00 www.DataSheet4U.com
Dominant Viewing Forward Voltage IR(µA) Wavelength Angle VF (v) @ IF = 20 mA @ VR = 5V λD(nm) @ IF = 20mA 2θ1/2 Typ. 15° Typ. Typ. Max. Max.
Stand Off
Epoxy Color
K1RCCC0-TK
5520
6700
628
2.2
2.6
10
No
Clear
BIN # Intensity (mcd) @ IF=20mA
W 5520-7735
X 7735-10830
Y* 10830-15160
Note : [＊] Bin with less distribution.
Package Dimensions
Beam Pattern
0° 30° 30°
60°
60°
100% 75%
50%
25%
0%
25%
50%
75% 100%
I v (%)
Note: ● All dimensions are in millimeter. ● Unspecified tolerance : ±0.20mm. ● Protruded resin under bottom surface of epoxy is1.5mm max. ● Lead spacing is measured where the leads emerge from the package ● Specifications are subject to be changed without notice.
Absolute Maximum Ratings at TA = 25℃ Parameter Average Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operating Temperature Range Storage Temperature Range Lead Soldering Temperature
[a]
Symbol IF I peak VR PD T OPR T STO T SOL
Maximum Value 30mA 100mA 5V 78mW -40℃ ~ + 85℃ -40℃ ~ + 100℃ 260℃ / 5 seconds
USER---APPROVED
Notes: [a] Duty Ratio = 1/10, Pulse Width = 0.1ms.
Headquarters
5F, No. 1, Creation Road II, Hsinchu Science Park, Hsinchu, Taiwan 300, R.O.C. Tel : 886-3-5679000 Fax : 886-3-5679999 http://www.eoi.com.tw E-mail :
[email protected]
U.S. Office
1400 W. Lambert Road, S...
